Specifications

Configuring Recipes
PlantScape Server and Client Configuration Guide 369
Defining the Ingredients of the Recipe
You can define up to 30 ingredients in a recipe. If there are more than 30
ingredients, you need to divide the process into 2 or more recipes and chain
them together (see “Chaining Recipes” on page 370).
The fields that define the recipe are:
Description A fuller description of the recipe than can be displayed
in the title.
Scale The scale factor for the recipe. Ingredients in a recipe
can be scaled to less than 100% so that a partial recipe
quantity can be produced. When the recipe is loaded,
all ingredients with Scaled set to “Yes” are scaled by
the percentage specified in this field. This percentage
can be changed by anyone using the OPER security
level or higher.
Unit The descriptor of a unit to which the recipe can be
loaded.
Point The last 14 characters of the point ID to be loaded (the
first two characters are taken from the unit descriptor).
Parameter The point parameter to be loaded.
Description A description of the ingredient. This description will
be used in custom reports.
Master The usual value for the ingredient. This value is for
operator information.
Minimum The minimum value for the ingredient. The recipe will
not be loaded if the operator enters a working value
that is less than this value.
Maximum The maximum value for the ingredient. The recipe will
not be loaded if the operator enters a working value
that is greater than this value.
Working The value to be loaded. If the Scaled field for this
ingredient is set to “Yes”, this value will be scaled by
the percentage specified in the Scale field for the
recipe. This field can be changed by anyone using the
OPER security level.
plscpcg.book Page 369 Monday, May 28, 2001 10:11 AM