Specifications

Security
PlantScape Server and Client Configuration Guide 347
Security
If you are using Station-based security, you assign both local and remote areas to
the Stations on their local servers. You cannot use a remote server to assign any
areas to Stations. (For information about Station-based security, see “Assigning
Areas to Stations” on page 222.)
If you are using operator-based security, you configure the operators on all
servers where they need to log on. You then assign both local and remote areas
to the operators on their local servers. You cannot use a remote server to assign
any areas to operators. (For information about operator-based security, see
“Assigning Areas to Operators” on page 222.)
Areas are used to restrict Access to both local and remote Server data.
If you are using point control levels, the control level is passed to the remote
server and checked at the remote Server.
plscpcg.book Page 347 Monday, May 28, 2001 10:11 AM