Specifications

Synchronizing Other Files
PlantScape Server and Client Configuration Guide 325
During synchronization the file transfer program attempts to transfer files from
the indicated directories on the primary server to the backup server. The time and
date that the file transfer program ran is recorded. During periodic transfers the
file transfer program attempts to transfer any files from the indicated directories
that have changed since the last time the program ran. Files are transferred if
either:
• The file does not exist on the backup server
• The date and time stamp on the backup server differs by more than 60
seconds to the date and time stamp on the primary server, even if the file on
the secondary server is newer.
Changing the Default Transfer Period
You can change the default transfer period, by adding an option to the link add
line in the redundancy hardware build file. The redundancy hardware build file is
found in the \server\user\redun.hdw.
The following example changes the transfer period to 30 minutes for a dual
network.
Example DEL LNK00
ADD LNK00 NETWORK_LINK DAEMON_VALUE2=30
DEL LNK01
ADD LNK01 NETWORK_LINK DAEMON_VALUE2=30
plscpcg.book Page 325 Monday, May 28, 2001 10:11 AM