Specifications

Alarm and Event Reports
PlantScape Server and Client Configuration Guide 249
Event location
Use the Event Location list to specify whether the online event file is
to be searched, or whether events should be retrieved from an event
archive previously restored to the playback area.
Area
Enter an area code in the Area field if you only want to include alarms
and events in a specific area.
Point ID(s)
Enter a specific point ID or use wildcard characters to search for a
number of points. For details of wildcard characters, see “Using
Wildcard Characters to Specify Report Data” on page 246.
Event description
You can either enter a specific event description or use wildcards to
specify a number of event descriptions. For details of wildcard
characters, see “Using Wildcard Characters to Specify Report Data” on
page 246.
Subpriority
You can also specify the subpriority of the alarms you want included in
the report. For information about alarm sub-priorities, see “Defining
Events, Alarms, and Alarm Priorities” on page 162.
4 Under Occurring during, set your time period as described in “Specifying
Time Periods for Reporting” on page 246
5 Under Options, enable or disable the Print field time check box as
required.
Note Print field time is not supported on all controllers. Where
supported, it is used to include in the report printout, the time that the event
took place in the controller.
plscpcg.book Page 249 Monday, May 28, 2001 10:11 AM