Specifications

Configuring Reports
PlantScape Server and Client Configuration Guide 245
Select a file type for the output file. If you select a file type, the report
will not be printed.
Periodic Reporting
Enable Periodic Reporting
Select this check box if you want the report to be run automatically at
specified intervals. If the report is requested by Algo 70 and you want
the report printed, you need to select this check box.
Destination
Choose a printer for the periodic reports from the Destination list.
Next Report
The time and date that the report should run next.
Interval
To specify the frequency of periodic reporting, click the Interval list
and select the desired interval. The interval can be: none, hour, shift,
day, week, month, quarter or year.
If you specify an interval, the server will calculate the next run time
automatically. Every time the report runs, the next run time is
recalculated. If this calculation gives a date that does not exist, the run
time is set to the beginning (not necessarily the 1st) of the next month.
For example, the next run time for a monthly report scheduled for
31-Jan is calculated as 3-March, because 31-Feb does not exist.
Operator ID
To limit the areas from which data is reported, specify the ID of an
operator who is assigned the areas you want to include. Operator ID
does not apply to all reports, but when the field is visible you must
specify an ID.
Report Output
Even if they are sent to a printer, reports are also always written to a file. The file
names used are:
server\report\rpt
nnn .htm
where
nnn is the report number
For example:
server\report\rpt001.htm
plscpcg.book Page 245 Monday, May 28, 2001 10:11 AM