Specifications

13 – Configuring Reports
244 R400
Name
The name to be used when the report is requested by name. For example,
you might want to use a more specific description such as “Shift1” for the
report name.
You can use a maximum of 10 characters. The name must be unique to this
report and must not contain any spaces.
Title
The report title to be shown on the report output and the summary display.
The title can be up to 70 characters. For example, you might want to use a
general description such as “Alarm and Events Report for Area AB” for the
report title.
Area
If you want to ensure that only operators or stations that have access to a
particular area can view or request the report, enter the area code. (For
information about controlling system access, see “Configuring Security and
Access” on page 209.)
Request Program LRN
The LRN of an application program to be requested after the report is
completed. LRNs are briefly described in “Server Display Program” on
page 75 and “Keyboard Service Program” on page 89. For more detailed
information about LRNs and application programs, see the Application
Development Guide.
Reporting on Request
Enable Reporting on Request
Reporting on request means that operators and other users can run the
report at any time they need it. To configure a report to be run on
demand, select Enable reporting on request and complete the
remaining fields in that area of the display.
When users request a report, they can view the report on screen at the
Station they are using, and they can also request that the report be
printed.
Destination
Select Station Default Printer if you want the report printed on the
default printer defined for this Station (for information about
configuring the default demand report printer for a Station are
described in “Printer Assignment” on page 81).
OR
Select a different printer from the Destination list.
OR
plscpcg.book Page 244 Monday, May 28, 2001 10:11 AM