Specifications

13 – Configuring Reports
240 R400
Report Types
Pre-formatted
You can choose from the following types of pre-formatted reports for retrieving
information from the PlantScape server database.
Alarm and Event
Alarm and event details from the event file. This report enables you to
analyze alarms and events that occurred during a specified time span on
specific points. Excludes remote points. See “Alarm and Event Reports” on
page 248.
Alarm Duration
The duration of alarms and events on nominated points during a nominated
time span. Excludes remote points. See “Alarm Duration Reports” on
page 250.
Cross Reference
Where points are referenced in the server database. The report lists the
following types of references for the nominated points: custom displays,
trend sets, algorithms, reports, operating groups, history gates, source
address for another point, application program point lists. Excludes remote
points. See “Cross Reference Reports” on page 252.
Downtime Analysis
This report is only available if you are licensed for the Downtime Analysis
option. The report is used to record plant delays that occurred during a
nominated time span. Excludes remote points. For information on
configuring Downtime Analysis reports, see “Configuring Downtime
Analysis” on page 375.
History Archive
The History Archive creates archives of point history; it does not produce
text output. Excludes remote points. For more information, see “Configuring
History Archiving” on page 170. This report type is supported for backward
compatibility only.
Point Attribute
Points that are in a specified state; for example, you can generate a report
on all points that are off-scan, have alarms inhibited, have a bad PV, or are
in manual mode. Excludes remote and flexible points. See “Cross Reference
Reports” on page 252.
plscpcg.book Page 240 Monday, May 28, 2001 10:11 AM