Specifications

PlantScape Server and Client Configuration Guide 225
11 Configuring Group and Trend
Displays
This chapter describes how you configure two types of standard displays that can
be used for grouping information and showing trends:
• Group displays
• Trend displays
These displays require only minimal configuration and provide a convenient way
for operators and other users to view information about a group of related points
on a single display.
Group displays and Trend displays are standard displays available with every
PlantScape installation, but it is not mandatory to use them. You might prefer to
use custom displays instead of (or as well as) standard displays.
For example, instead of using the standard Group display, you can create your
own customized Group Detail displays. When configuring points, you can then
specify a custom Group Detail display to be called up.
For more information, see “Configuring Station Displays for Points” on page 175.
For information on defining displays for points on Honeywell Control Processors,
refer to the PlantScape Process Control Building Guide.
For information about building your own custom displays, see the Display
Building Guide.
plscpcg.book Page 225 Monday, May 28, 2001 10:11 AM