Specifications

10 – Configuring Security and Access
224 R400
Changing the Names of Security Levels
You can change the default names (OPER, MNGR, and so on) that are used to
identify each security level, and which are displayed in Station’s Status Line. The
default name for security levels are PlantScape acronyms that can be changed via
the System Acronym Configuration display.
To change the security level acronyms:
1 From the Station menu select Configure
⇒
Acronyms
⇒
System. This calls
up the System Acronym Configuration display.
Acronym numbers 265 through 270 are used for the default security levels.
2 Click the acronym field that you want to change and type in a new
4-character acronym.
Note • Any changes you make to default security level names will be overwritten
when you upgrade PlantScape. If you do not use the default names for
security levels, you need to repeat the above process every time you
upgrade PlantScape.
• Acronyms are more commonly used in building custom displays. For
information about how acronyms are used in custom displays, refer to the
Display Building Guide.
plscpcg.book Page 224 Monday, May 28, 2001 10:11 AM