Specifications

9 – Configuring Alarm Paging
208 R400
For example, a Station operator named Norm Smith might have areas A1, A2, and
A3 assigned to him. Only alarms from areas A1, A2, and A3 are sent to any pager
configured with Norm Smith’s Operator ID.
For information on setting up an operator’s profile, see “Configuring
Operator-Based Security” on page 216.
To nominate alarms by areas:
1 Click the Pagers tab on the Alarm Paging display.
2 Enter the Pager Name and Pager ID.
3 Enter the Start and Stop Times and Available Days.
4 Use the drop-down list under Areas Assigned to Operator to nominate a
Station operator whose profile includes the area you want to assign.
5 Select the Minimum Priority for the alarm.
Enabling Pagers
To enable the pagers you want to use, select the appropriate Enable checkboxes
on the left of the Pagers tab.
Alarm Message Content
The content format of each paged alarm is specified on the Communications tab.
These are global settings that apply to all paged alarms.
Select one or more checkboxes from the following options:
• Sequence Number
•Date
•Time
• Point ID
•Alarm
•Priority
• Description
•Value
•Units
• Message Text (does not apply to a distributed architecture)
plscpcg.book Page 208 Monday, May 28, 2001 10:11 AM