Specifications

Configuring Station Displays for Points
PlantScape Server and Client Configuration Guide 177
For example, the following figure shows a Group Detail display for an operating
group consisting of two analog points and six status points. The analog points in
this display all use the standard faceplate for analog points and the status points
all use the standard faceplate for status points.
You can create custom Group Faceplate Template displays and then use Quick
Builder to specify the template for particular points.
For information on defining a custom Group Faceplate Template display for a
point on a PlantScape Control Processor, see the Process Control Building Guide.
You use Quick Builder to specify a user-defined Group Faceplate Template
display for a status, analog, or accumulator point.
Using Quick Builder to Configure Displays for Points
You use Quick Builder to specify which operating groups and trend sets that a
point is to belong to, and which Associated display, Point Detail display, and
Group Faceplate Template are to be used.
Figure 8.13 Operating Group Detail Display
plscpcg.book Page 177 Monday, May 28, 2001 10:11 AM