Specifications

Main Properties
PlantScape Server and Client Configuration Guide 141
State6AlarmSubPriority The alarm subpriority of state 6.
(0-15)
108
✔
State7AlarmSubPriority The alarm subpriority of state 7.
(0-15)
109
✔
AssociatedDisplay When the associated display key is
pressed, this display is called up.
110
✔✔✔
AlarmMessageIndex A point can be configured to
generate a message. This is the
message number.
114
✔✔✔
REALARM If set (=1), the point in alarm
transitions between alarm states.
116
✔
PVExternalChangeAlarmEnable If enabled (=1), an alarm is
generated if the PV changes.
117
✔✔
MDExternalChangeAlarmEnable If enabled (=1), an alarm is
generated if the MD changes.
118
✔✔
OPExternalChangeAlarmEnable If enabled (=1), an alarm is
generated if the OP changes.
119
✔✔
SPExternalChangeAlarmEnable If enabled (=1), an alarm is
generated if the SP changes.
120
✔
A1ExternalChangeAlarmEnable If enabled (=1), an alarm is
generated if the A1 changes.
117 y
A2ExternalChangeAlarmEnable If enabled (=1), an alarm is
generated if the A2 changes.
118
✔
A3ExternalChangeAlarmEnable If enabled (=1), an alarm is
generated if the A3 changes.
119
✔
A4ExternalChangeAlarmEnable If enabled (=1), an alarm is
generated if the A4 changes.
120
✔
State0AlarmEnabled State 0 is an alarm state. 121
✔
State1AlarmEnabled State 1 is an alarm state. 121
✔
State2AlarmEnabled State 2 is an alarm state. 122
✔
State3AlarmEnabled State 3 is an alarm state. 123
✔
State4AlarmEnabled State 4 is an alarm state. 124
✔
Internal Parameter Description
ID Status Analog Acc.
Table 8.2 Internal Point Parameters
plscpcg.book Page 141 Monday, May 28, 2001 10:11 AM