Specifications

8 – Configuring Points
138 R400
State0Descriptor The text that describes PV state 0,
for example, Travel.
68
✔
State1Descriptor The text that describes PV state 1,
for example, Open.
69
✔
State2Descriptor The text that describes PV state 2,
for example, Closed.
70
✔
State3Descriptor The text that describes PV state 3,
for example, Invalid.
71
✔
State4Descriptor The text that describes PV state 4,
for example, Stopped.
72
✔
State5Descriptor The text that describes PV state 5,
for example, Stopped.
73
✔
State6Descriptor The text that describes PV state 6,
for example, Stopped.
74
✔
State7Descriptor The text that describes PV state 7,
for example, Stopped.
75
✔
TargetPVforOPState0 The PV state that is expected for OP
state 0, for example, 0=Travel.
76
✔
TargetPVforOPState1 The PV state that is expected for OP
state 1, for example, 1=Open.
77
✔
TargetPVforOPState2 The PV state that is expected for OP
state 2, for example, 2=Closed.
78
✔
TargetPVforOPState3 The PV state that is expected for OP
state 3, for example, 3=Invalid
79
✔
PVAlgoNumber The number of the algorithm used
during PV processing.
85
✔✔✔
PVAlgoBlock The number of the algorithm block
used by the PV algorithm.
86
✔✔✔
ActionAlgoNumber The number of the algorithm used
during PV change processing.
87
✔✔✔
ActionAlgoBlock The number of the algorithm block
used by the PV change algorithm.
88
✔✔✔
Internal Parameter Description
ID Status Analog Acc.
Table 8.2 Internal Point Parameters
plscpcg.book Page 138 Monday, May 28, 2001 10:11 AM