Specifications

Main Properties
PlantScape Server and Client Configuration Guide 137
H8HE History Extended 8 hour 48
✔✔✔
H24HE History Extended 24 hour 49
✔✔✔
OnScan 0=off,1=on 56
✔✔✔
Alarm Value If the point is not in alarm, the
Alarm Value parameter has a value
of 0. Otherwise the value is equal to
the alarm type as defined in the
alarm limit. For example, if the
point is in the PV LO state the Alarm
Value parameter is 6.
57
✔✔✔
ControlLevel The operator must have this control
level or better to be able to control
the point.
58
✔✔✔
AlarmDisabled Alarming is disabled for the point.
(0=enabled. 1=disabled)
59
✔✔✔
PVInError The Process value is unreliable.
(0=ok, 1=error)
60
✔✔✔
ModeInError The Mode value is unreliable.
(0=ok, 1=error)
61
✔✔✔
SetPointInError The Setpoint value is unreliable.
(0=ok, 1=error)
63
✔✔✔
OutputInError The Output value is unreliable.
(0=ok, 1=error)
62
✔✔✔
A1InError The A1 value is unreliable. (0=ok,
1=error)
64
✔✔✔
A2InError The A2e value is unreliable. (0=ok,
1=error)
65
✔✔✔
A3InError The A3 value is unreliable. (0=ok,
1=error)
66
✔✔✔
A4InError The A4 value is unreliable. (0=ok,
1=error)
67
✔✔✔
Units The engineering units for the point,
for example, Liters, The PV is 3.45
Liters.
68
✔✔
Internal Parameter Description
ID Status Analog Acc.
Table 8.2 Internal Point Parameters
plscpcg.book Page 137 Monday, May 28, 2001 10:11 AM