Specifications

Viewing Channel and Controller Configuration Information
PlantScape Server and Client Configuration Guide 113
For each controller in your system, the System Configuration–Controllers display
shows:
• Whether or not the controller is enabled
• The channel number
• The Hiway identifier (only applicable to TDC 3000 Data Hiway controllers)
• The controller ID
This information is also available on the System Status–Controllers display, and
you can enable or disable controllers on both displays.
The Configuration Upload and Configuration Download columns only apply
to TDC 3000 Data Hiway or UDC controllers, and are described in the individual
controller configuration reference guides.
Viewing Details of Points on a Specific Controller
After you have defined your points to the system, you can click View Points to
display a list of the points defined for a specific controller in the server database.
The points listed are those that have an address that refers to a real location
within the controller. Points that have been associated with the controller for
scanning purposes, but have addresses that reference other points or locations in
the database, are not included.
Viewing Controller Configuration Details
To view detailed configuration and status information about a specific controller:
1 Call up the System Status–Controllers display by following the instructions in
“Enabling a Controller” on page 109.
2 Double-click the name of a controller listed in the display. This opens the
Controller Status Detail display for that controller.
3 Double click the controller number. This opens the Controller Configuration
Detail display for that controller.
plscpcg.book Page 113 Monday, May 28, 2001 10:11 AM