Specifications

7 – Configuring Controllers
112 R400
Viewing Channel and Controller Configuration
Information
You can call up System Configuration displays to view information about the
channels and controllers that have been defined and enabled for your system.
Viewing Channel Configuration Summary
To call up the System Configuration–Channel summary display, which lists all the
channels configured for your system, either:
• Select Configure
⇒
System Hardware
⇒
Controller Interfaces
⇒
Channels from the Station menu bar.
• Press <F1> to call up the System Menu display, and click System
Configuration. From the System Configuration Menu display click
Channels in the navigation panel.
To call up the Channel Configuration display for a channel, click its number or
title in the System Configuration–Channel display.
Note •The Hiway identifier applies only to channels for TDC 3000 Data Hiway
controllers.
•The Enable Hiway Switching checkbox under TDC Channel Options
only applies to channels for TDC 3000 Data Hiway controllers. The
checkbox is used to enable and disable automatic switching by the server to
the backup TDC 3000 Data Hiway when the channel fails. See the online
reference module for the TDC 3000 Data Hiway controller interface for more
details.
Viewing the System Configuration–Controllers
To call up the System Configuration–Controllers display, which lists all the
controllers defined to your system, either:
• Select Configure
⇒
System Hardware
⇒
Controller Interfaces
⇒
Controllers from the Station menu bar.
• Press <F1> to call up the System Menu display, and click System
Configuration. On the System Configuration Menu display click
Controllers in the navigation panel.
plscpcg.book Page 112 Monday, May 28, 2001 10:11 AM