User manual

4
www.supercircuits.com
SECTION 2: INSTALLATION AND SETUP
SECTION 2
Installation and Setup
2.1 What’s in the box
Your recorder includes the following:
• Mini DVR recorder
• A/V cables (2)
• DC power adapter
• User manual (this document)
• Quick installation guide
2.2 What you need
To install the recorder, you will need:
• CCTV camera
• Video monitor with audio (if audio is used)
• SD memory card ≥ 256 MB for recording
• 2 AA batteries, nickel metal hydride (Ni-MH rechargeable) or alkaline, if powering the recorder with
batteries
2.3 Installation and power on
1. Insert a standard SD card with a capacity of 256 MB or larger into the card slot on the top of the
recorder. Push the card in until it locks into place.
2. Plug an A/V cable (provided) into the AV OUT jack on the DVR, then attach it to an A/V monitor.
When plugging the cable into the monitor, connect the yellow RCA connector into the video input,
and the white RCA connector to the audio input.
3. Plug an A/V cable (provided) into the AV IN connector on the recorder, then attach it to a CCTV
camera.
When plugging the cable into the camera, connect the yellow RCA connector to the video output,
and the white RCA connector to the audio output. An (RCA to BNC) adapter may be required to
attach the camera video output to the cable.