User manual

4.5 Graphic User Interface (GUI) Display

The Graphic User Interface (GUI) Display screen (refer to Fig. 18) contains the following parameters

for on screen user interface display configuration:

<Channel Title> Set tab: click on this Set tab to enter the channel (camera) title

<Time Display>: select to enable the Time display

<Channel Title>: select to enable the Channel (camera) Title display

<Record Status>: select to enable the Record Status display

<Alarm Status>: select to enable the Alarm Status display

<Deflick>: select to enable the Deflick

<Transparency>: adjust the transparency of text display

<Resolution>: select the resolution of VGA display

Region Cover is a special feature which allows user to define coverage regions of certain areas

from the on screen display for privacy and security issues.

<Channel>: select the channel (camera) to be defined for the coverage regions

<Region Cover> : click on this  to enable the Region Cover feature.

☞

Note: User can define up to 4 coverage regions for each channel (camera) by clicking on the

following tabs.

<1> <2> <3> <4> tab: click on the tabs to enable the coverage regions

☞

Note: the tabs must be selected in order to be defined

<Set> tab: click on this Set tab to switch to full screen to define the enabled coverage regions

☞

Note: drag each coverage region on the full screen display to the preferred position. Right click

then select <back> to go back to the previous screen.

<Time Display> : click on this  to enable time display

<Channel Title> : click on this  to enable channel (camera) title display

<Set> tab: click on this Set tab to switch to full screen to position the Time Display and Channel

(camera) Title display on screen

☞

Note: Drag on the Time and Channel Title to the preferred position. Right click then select <back>

to go back to the previous screen.

<OK>: exit with the changes

<Cancel>: go back without the changes