User manual

7
cause fire or electrical shock. Use a dry cloth and clean it on a regular basis to wipe
away the dust and dirt that collects on the device. In dusty, humid or greasy
environments, the dust that collects around the ventilation areas on the outer casing
may become saturated with humidity and short-circuit, leading to fire.
Do not cut, damage, alter, or place heavy items on the power cord or power supply. Any
of these actions may cause an electrical short circuit, which may lead to fire or electrical
shock.
Do not handle the equipment if your hands are wet. Handling it with wet hands may lead
to electrical shock. When unplugging the power cord, make sure that you hold the solid
portion of the plug. Pulling on the flexible portion of the power cord may damage or
expose the wire and insulation, creating the potential for fire or electrical shock.
This equipment should be operated only with the supplied power cord and power supply.
The voltage of the power source must be verified before using. Use only the
recommended power accessories. If the device has not been used for a long period of
time, disconnect the power source. Use of power sources not recommended for this
equipment may lead to overheating, distortion of the equipment, fire, electrical shock, or
other hazards.
Do not attempt to disassemble, alter or apply heat to the batteries. Do not place the
batteries near heat sources or expose to direct flame or heat. Neither should you
immerse them in water. Such exposure may damage the batteries and lead to the
leakage of corrosive liquids, fire, electrical shock, or explosion. If the eyes or skin
contact these substances, immediately flush with water and seek medical assistance
from a medical professional.
Do not use the supplied power cord and power supply with any other products. There is
a risk of fire and other hazards when the supplied power cord and power supply are
used with other products.
Do not attempt to disassemble, alter, or repair the equipment, It may cause fire,
electrical shock, explosion or serious injury. Please contact your equipment distributor
for services.