User manual

2.1 Schedule Recording

The Schedule screen (refer to Fig. 5) contains the following parameters for schedule recording

configuration:

<Channel>: select the corresponding channel (camera) for schedule recording configuration

<Redundancy>: not available on AD-800 and AD-808

<Length in Minutes>: setup the length of each recording file

<PreRecord in Seconds>: start the video recording before the beginning of scheduled recording periods

<Mode>: select the following mode for the corresponding channel (camera)

<Schedule> : select to start the video recording by schedule

<Manual> : select to start the video recording manually

<Stop> : select to stop the video recording

The following schedules need to be configured if the schedule recording is selected for the

corresponding channel (camera):

<Week>: select the day for scheduled recording setup

<Period 1>: set up the time interval of recording for Period 1

<Period 2>: set up the time interval of recording for Period 2

<Period 3>: set up the time interval of recording for Period 3

<Period 4>: set up the time interval of recording for Period 4

<Regular> : click on this  to select the corresponding period for regular video recording

<Detect> : click on this  to select the corresponding period for detection triggered recording

when camera detection is triggered

☞

Note: Please refer to Motion Detect, Video Blind, and Video Loss under the Main Menu>Alarm for

more information.

<Alarm> : click on this  to select the corresponding period for alarm triggered recording when

alarm input is triggered.

☞

Note: not available on AD-600

<OK> tab: exit with the changes

<Cancel> tab: go back without the changes

Select on [Advanced] tab (refer to Fig. 5.1) for

<Back>: back to previous screen

<Main Screen>: short cut to Main Screen