User`s guide

Installing the Wireless Receiver

5. Installing the Wireless Receiver

Before powering on the receiver, make sure to first connect and

power on the camera. This will ensure a proper connection.

1 Screw the wireless antenna to the back of the receiver.

2 Connect the yellow video cable and white audio cable (mono) to your TV, DVR, or observation

stem.

• Use the RCA/BNC adapter (included) to connect the video cable to a BNC port.

3 Connect the power cable to the power adapter. Plug the power adapter into a power outlet or

sur

ge protector.

4 Plac

e the receiver in a place that will have clear reception to your camera

5.1 On-Screen Display

1 Signal Indicator: The signal indicator shows the strength of the signal being received from

the camera. The number of bars in the signal indicator shows the strength of the signal. 

One or no bars indicates the signal is poor. Four bars indicate a very strong signal.

2 Status Indicator: The st

atus indicator message "Connecting" appears when the receiver is

trying to locate a camera.

ATTENTION:If the signal is

low (e.g. 1 or 2 bars) adjust the antennas or reposition the

camera or receiver to improve signal strength.

1. Avoid installing in a location which requires the wireless signal to pass through cement, con-

crete, and metal structures. This will re

duce the range of transmission.

Signal Indicator Status Indicator

1 2