Specifications

A Quality stylus tool that will give you a better, eaiser job
with dry transfer DIRECT ETCH patterns. For charac-
ters, lines & patterns. Back end has 3/8i felt burnisher
Standard: patterns .08-.25
Spoon Tip: Patterns .25in. & larger
BURNISHING
TOOLS
STOCK # DESC. 1EA 5+EA
14873-DT Standard Tool $4.95 $3.95
14874-DT Spoon Tip Tool $5.99 $5.75
WT: .1
Lacquer based black resist ink
can be used directly on bare
copper boards to touch up
breaks, add a trace etc. before
etching, Can also be used on clear
film artwork (Positives)to correct or add traces before
exposing board.
RESIST PENS
STOCK # DESC. 1EA 5+EA
14876-DT Fine Point Pen $2.25 $1.95
14877-DT Extra Fine Point Pen $2.45 $2.25
WT: .04
For board material up to 9in. X 12in.
Metal frame holds your artwork tight
aginst the PC Board during exposure.
Includes Metal frame, Glass Front
cover, backing board & instructions.
CONTACT
EXPOSURE FRAME
STOCK # DESC. 1EA 5+EA
14892-DT ER-10 Exposure Frame $28.95 $23.95
WT: 3
FALCON Dust-Off" , 12oz. can of duster used to
blow dust and durt off equipment. Includes
extension tube for hard to reach spots. Contains
difluoroethane, Does not contain CFC's!.
CANNOT BE SHIPPED AIR
WT: 1
"DUST OFF"
AEROSOL DUSTER
16495-CE DUST-OFF Duster $4.95 $4.00
STOCK # DESC. 1EA 4+EA
Black plastic box with a bow
& tassels, epoxy painted on
top left corner. Now this has
a black gloss "bow" painted
on a flat black box? Figured that it
was designed to hold "freebies" at some
type of ceremony. Great for keeping pencils, pens,
crayons, markers, the family jewels, etc. Nothing to
secure lid except internal lip.
PLASTIC
GIFT BOX
16174-BX Plastic Gift Box $1.25 $0.99
STOCK # DESC. 1EA 10+EA
L: 8" W: 6" T: 2" WT: .6
Dry concentrated Ferric Chlo-
ride. A dry powder that is mixed
with water to produce a liquid
used to remove the excess cop-
per from PC board material. 1/4 lb. will makeup 1 pint of
etchant solution. 1 pint will etch approx. 200sq/in of 1 oz.
copper single side board. NOTE: Must be mixed/stored/
used in glass or plastic containers NO metal!
BOARD
ETCHANT
STOCK # DESC. 1EA 5+EA
WT: .5/1.1
14894-DT 1/4 lb. Etchant $5.25 $4.75
Drawn & Formed aluminum boxes
with lids. Small fits into Medium that
fits into Large. These are unfinished
meaning no paint, and some rough
edges.
Small: 7"L X 4" W X 1-3/4" D. Lid >1/8" larger L & W D:1/2"
Medium: 8" L X 5" W X 2" D. Lid> 1/8" larger L & W D: 1/2"
Large: 9" L X 6" W X 2-7/16"D. Lid> 1/8" larger L & W D: 9/16"
"NESTED" ALUMINUM
BOXES
WT: 1.4
STOCK # DESC. 1+SET
16043-BX Aluminum Nested Boxes $12.95
Stainless steel, multi-purpose
lock box. Spot welded with
carry handle & hasp latch with
padlock hole.
STAINLESS LOCK
BOX
17621-BX Larger Stainless Lock Box $12.95
STOCK # DESC. 1EA
L: 9" W: 6" H:2-3/4" WT: 1
PACTEC CM59-135,
Clamshell design ABS plastic in-
strument case. Internal posts for hold-
ing PC boards up to 8.6" X5.4". Black
shells and endplates. Slightly contoured top & bottom.
Includes 4 screws & 4 rubber feet.
D: 8.79" W: 5.57" H: 1.54" WT: .65
STOCK # DESC. 1EA
17695-BX PAC-TEK CM59-135 Case $8.95
INSTRUMENT
CASE
Long, stainless steel, multi-
purpose lock box. Spot welded with
carry handle & hasp latch with padlock hole.
LONG STAINLESS
LOCK BOX
17622-BX Stainless Long Box $12.95
STOCK # DESC. 1EA
L: 12" W: 4-1/2" H: 4" WT: 1.5
Stainless steel mini, multi-purpose
lock box. Spot welded with carry
handle & hasp latch with padlock hole.
SMALL STAINLESS
LOCK BOX
17620-BX Stainless Lock Box $9.95
STOCK # DESC. 1EA
L: 7" W: 4" H: 2" WT: 1
Molded international Orange, ABS
plastic equipment case with handle,
latches and hinges. Silicone rub-
ber gasket for water resistance.
Foam insert in Top & Bottom.
Inside: L: 9.3" W: 6.2" HT: 3.5"
L: 10.23 W: 8" H: 4" WT: 1.85
STOCK # DESC. 1EA
17810-BX Small Orange Transit Case $17.95
STORAGE/
TRANSIT CASE
Clamshell design ABS plastic
instrument case. Internal
posts for holding PC boards.
Light gray shells with Dark
Gray endplates. Slightly con-
toured top & bottom. Includes
4 screws.
PLASTIC INSTRUMENT CASES
17195-BX 3.65 x 6.25 x 2.3 .4 $7.95 $6.95
17196-BX 6.12 x 7.1 x 2 .62 $10.95 $9.95
17197-BX 5.38 x 7.5 x 3.17 .69 $11.95 $10.95
17198-BX 7.9 x 11 x 3.15 1.26 $17.95 $14.95
17199-BX 3.5 x 2 x 1.3 .1 $3.95 $3.59
17200-BX 4.72 x 2.36 x 2 .24 $5.95 $4.95
17201-BX 5.9 x 3.15 x 2.4 .37 $7.95 $6.95
17202-BX 7.5 x 3.9 x 3.15 .66 $11.95 $9.95
STOCK # DIM. (W/L/Hin ) WT. 1EA 10+EA
Black rubber or Clear polyurethane
stick-on feet.
Sold in strip of 4pcs.
BLACK Dia: 6mm (.236") H: 3mm (.118") WT: .002
CLEAR Dia: 8.3mm (.32") H: 2.6mm (.1") WT: .005
BLACK/CLEAR FEET
STOCK # DESC. 1PK
17552-HD Black Rubber Feet $0.49
17551-HD Clear Rubber Feet $0.49
Clamshell design plastic in-
strument case. Internal posts
and slots for holding PC boards.
Off white shells and end plates. Slightly contoured top &
bottom. Square front face.
O/D listed below
17800-BX: L: 7.5" W: 4.7" H: 2.4" WT: .51
17801-BX: L: 4.7" W: 3.2" H: 1.6" WT: .21
17802-BX: L: 5.9" W: 3.8" H: 2.1" WT: .4
17803-BX: L: 3.9" W: 2.75" H: 1.4" WT: .15
STOCK # DESC. 1EA
17800-BX 7.5in. Clamshell Case $4.95
17801-BX 4.7in. Clamshell Case $3.49
17802-BX 5.9in. Clamshell Case $4.59
17803-BX 3.9in. Clamshell Case $3.39
CLAMSHELL
CASES
Extruded aluminum case with mounting flanges on end
plates. Natural Aluminum finish on case and end plates.
Slots for PC Board on inside. Groved outside with
smooth end plates. Includes Double Sided FR-4 board
with Plated Through .032 holes on .1" spacing.
Board For 17804 BX contains 20X57 Holes
Board For 17805 BX contains 24X67 Holes
Board For 17806 BX contains 32X77 Holes
I/D listed below
17804-BX: L: 6" W: 2.4" H: 0.9" WT: .6
17805-BX: L: 7" W: 2.75" H: 1.187" WT: .8
17806-BX: L: 8" W: 3.75" H: 1.62" WT: 1.13
STOCK # DESC. 1EA
17804-BX 6in. Extruded Alum. Case/Board $9.95
17805-BX 7in. Extruded Alum. Case/Board $12.95
17806-BX 8in. Extruded Alum. Case/Board $14.95
EXTRUDED
INST. CASES/
BOARD
L: 20" H: 1-3/8" T: 3/4" WT: 5/pair
17418-RK Pair Equipment/Drawer Slides
$24.95
STOCK # DESC. 1+EA
EQUIPMENT
SLIDES
Accuride, 3 section, Zinc plated steel, ball bearing equip-
ment/drawer slides. Front disconnect allows removal of
chassis from cabinet. Side mounting. Side Space: 3/8".
Closed Position: 20", Fully Extended: 42", Slide Travel:
22", Max Load: 100lbs/pair.
Sold as pairs.
360
O
VIEW
@MPJA.COM
ORDERS: CALL 800-652-6733 FAX [phone] WWW.MPJA.COM
56
P.C. BOARD/BOXES/CASES
Visit www.mpja.com for our Complete Products Lines.