Specifications

BREADBOARDS
4443-TE A 830 point 6-1/2” X 2-1/8” .3 $4.95 $3.95
4444-TE B 830 point 3 Binding Post and Jumper kit 7-7/8” X 4-1/8” .6 $9.95 $8.95
4445-TE C 1660 point 3 Binding Post and Jumper Kit 8-3/8” X 5-1/8” .9 $12.95 $11.49
4446-TE D 2390 point 4 Binding Post and Jumper Kit 10-1/8” X 7-7/8” 1.3 $18.95 $16.95
4447-TE E 3220 point 4 Binding Post and Jumper Kit 10-3/8” X 9-1/8” 1.5 $22.95 $19.49
7027-TE F 90 Piece 22 AWG Jumper Wire KIt .3 $3.95 $3.49
STOCK # FIG. DESCRIPTION SIZE L X W WT. 1EA 10EA
ABS plastic body, Aluminum mounting base for figures B,C,D and E. Nickel plated phosphor bronze contacts.
Contact resistance less than 1 milliohm @ 1kHz. Tested for over 10,000 cycles. Snap lock molded dovetail for
combining multiple boards, Suitable for 19-29 AWG wire & all DIP size components. Please visit our web site for
more detailed information.
A
BCD EF
W: 8" D: 10-1/2” T: 3-1/2” WT: 5.7
17710-TE Metered Powered Breadboard
$89.95
STOCK # DESC. 1EA
POWERED PROTO-
TYPE SYSTEM
Single Sided
.062"phenolic board
.1" pad spacing
unplatedcopper pads
Mini general purpose prototyping board. 17 X 14 grid pattern
with 202 total holes (9 missing in corners). Holds 1+ 14 or 16
pin ICs with room for several discrete components. Ideal for
interface or signal isolation circuits. Fits 15917-BX Case.
1-3/4” X 1-1/2”
PROTO BOARD
L: 1-3/4" W: 1-1/2" WT: .009
1215 hole (15 X 81) breadboard patterened similar to our
830 hole breadboard (4443-TE). Center holes are
uncomitted. Holes either side are bussed 7 X 1. Does not
have Buss down sides. Holds approx 9pcs 14/16 pin ICs
L: 8-7/16" W: 1-1/2" WT: .04
15565-PB 1215 Proto Board
$2.95 $2.49
STOCK # DESC. 1EA 10+EA
1215 POINT PROTOBOARD
Single Sided, .062"phenolic board, .1"
pad spacing, unplated copper pads. 31 X
24 grid pattern with 708 total holes (9 missing in corners).
Holds 3+ 16 pin ICs. Fits 15913-BX Case.
3-3/16” X 2-1/2”
PROTO BOARD
L: 3-3/16" W: 2-1/2" WT: .024
Single Sided
.062"phenolic board
.1" pad spacing
unplatedcopper pads
Mini general purpose board for prototyping. 23 X 18 grid
pattern with 378 total holes (9 missing in corners). Holds 2+
14 or 16 pin ICs with room for several discrete components.
Ideal for interface or signal isolation circuits. Fits 15915-BX.
2-5/16” X 1-15/16”
PROTO BOARD
L: 2-5/16" W: 1-15/16" WT: .013
Single Sided
.062"phenolic board
.1" pad spacing
unplatedcopper pads
General purpose board for prototyping. 42 X 31 grid pattern
with 1293 total holes (9 missing in corners). Holds 10+ 14 or
16 pin ICs with room for several discrete components. Ideal
for interface or signal isolation circuits. Fits 15911-BX Case.
4-5/16” X 3-1/8”
PROTO BOARD
L: 4-5/16" W: 3-1/8" WT: .036
12” X 12” Double Sided copper clad PC
Board material. 1.6mm (1/16”) thick FR4
Base material with1oz. copper/side.
Sq: 12" WT: .74
15537-BD 12 X 12 Copper Clad
$8.95 $7.95
STOCK # DESC. 1EA 10+EA
COPPER CLAD BOARD
Premier Series boards are
ideal for repeatedly mak-
ing PC boards from POSI-
TIVE films (Opaque lines/
patterns on clear film). Re-
sist coated Premier boards do not require U/V light,
only a 100W light bulb. Double (DS) or single sided (SS)
copper clad PC Board material. FR4 Base material
with1oz. copper/side coated with resist and covered
with a peel off plastic sheet (removed before exposer).
Exposing frame recommended.
STOCK # DESC. WT. 1EA 5+EA
14880-DT 3” X 4” S/S .1 $4.95 $4.49
14881-DT 3” X 6” S/S .12 $5.95 $4.95
14882-DT 4” X 6” S/S .15 $6.82 $5.99
14883-DT 6” X 9” S/S .3 $11.00 $10.85
14884-DT 6” X 12” S/S .4 $17.95 $15.95
14885-DT 3” X 4” D/S .1 $5.49 $4.49
14886-DT 6” X 6” D/S .22 $10.95 $9.95
14887-DT 6” X 9” D/S .33 $13.95 $12.49
14888-DT 6” X 12” D/S .5 $19.95 $18.95
PREMIER SERIES
COATED BOARDS
8-1/2” X 11” clear film suitable for LASER
copier or printer to make artwork POSI-
TIVES from magazines etc. Also can be
used by directly taping, placing patterns or
opaque inks to generate artwork. PACK of 5
Sheets
COPY SHEETS
STOCK # DESC. 1EA 5+EA
14875-DT 5pcs. Copy Film Sheets $4.49 $3.75
WT: .12
Will plate a copper board with a bright,
protective tin plate approx. .0004”
thick. Improves solderibility, resists
oxidation/tarnish & produces a pro-
fessional appearance. Supplied as a
dry power concentrate. When mixed
will plate approx. 600sq./in. Kit includes: Concentrate,
Tray, handling tool & 16oz. storage bottle for mix.
TIN PLATING KIT
STOCK # DESC. 1EA 5+EA
14896-DT TIn Plating Kit $16.95 $15.49
14897-DT 1 Pt. Concentrate $7.50 $7.25
WT: .6/.4
15918-PB Mini Proto Board
$0.59 $0.39
STOCK # DESC. 1EA 10+EA
STOCK # DESC. 1EA 10+EA
16227-PB Small Proto Board $0.79 $0.49
15914-PB Medium Proto Board $1.10 $0.79
STOCK # DESC. 1EA 10+EA
15912-PB Large Proto Board $1.75 $1.10
STOCK # DESC. 1EA 10+EA
Single Sided .062"
phenolic board
.1" pad spacing unplated copper pads
Small general purpose board is actually 2 snap apart
boards for prototyping.Each holds one 20 pin IC or
discrete parts with .300-.700" width.
DUAL IC
PROTO BOARD
L: 3-5/8" W: 1-3/4" WT: .02
12349-PB Dual IC P/B $1.45 $1.25 $0.99
STOCK # DESC. 1EA 10EA 25+EA
Breadboard with built-in multi-out-
put power supply with LCD Meters.
Dual LCD Meters monitor the + & -
Variable output supplies.
Features: 2 LCD Voltmeters, 4 power
supply binding posts, 5 Distribution
strips (500 pts), 3 Breadboard pan-
els (1890Pts.), one +5VDC @ 1A supply, one 0 to +15VDC
@ .5A supply, one 0 to-15VDC @ .5A supply
All parts are mounted in a metal case. Includes 6ft. IEC
power cord.
Single Sided .062"
phenolic board
.1" pad spacing
unplated copper pads
Small general purpose board for ICs. 2 buss strips down
center. Other holes connected to allow connecting to IC
leed holes. 417 total holes. Holds up to six 14 or16 pin ICs.
IC PROTO BOARD
L: 2-13/16"W: 1-7/8" WT: .02
12348-PB IC Proto Bd.
$1.50 $1.19 $0.95
STOCK # DESC. 1EA 10EA 25+EA
Double (DS) or single sided (SS)
copper clad PC Board material.
Standard 1/16” thick FR4 Base
material with1oz. copper/side
STOCK # DESC. WT. 1EA 5+EA
14868-DT 3” X 5” S/S .1 $1.95 $1.49
14869-DT 4” X 6” S/S .12 $2.25 $1.95
14870-DT 6” X 9” S/S .3 $4.75 $3.95
14871-DT 6” X 6” D/S .2 $3.95 $3.25
14872-DT 8” X 10” D/S .4 $12.49 $10.95
COPPER CLAD
BOARDS
Concentrated developer (not etchant) for PRE-
MIER Resist coated board material. Mix 10/1
with water. 10 oz. of mix will develop 10-22sq.
ft. of board depending on art complexity.
PREMIER BOARD
DEVELOPER
STOCK # DESC. 1EA 5+EA
14890-DT 2oz. Developer $7.95 $7.49
14891-DT 4oz. Developer $13.95 $13.49
WT: .2/.6
THOUSANDS
more Items on www.mpja.com
Visit www.mpja.com for our Complete Products Lines.
BREAD/PROTO BOARDS
TECH. & INFO: CALL 561-848-8236 FAX [phone] [e-mail]
55