Specifications

LARGE DIGIT
PANEL METERS
3-1/2 digit, LCD, 200.0mV DC
basic input, .8" character
height, DPMs with black plastic face. adj. decimal point,
auto polarity, >100Mohm input imp. 2 readings/sec.,
0.5% accuracy. Snap-in panel mounting.
Built in scaling resistors for 20V, 200V & 500V ranges
9 VDC powered, Meter power must be isolated from
input (Cannot monitor own power source).
5 VDC powered, Meter power and Input can share a
common Ground (-input/-Power)
W: 3-3/8" H: 1-5/8" D: 1" O/A WT: .13
12305-ME 9V
LCD Panel Meter $9.95 $9.49
12306-ME 5V LCD Panel Meter $9.95 $9.49
STOCK # DESC. 1EA 10+EA
3-1/2 Digit, 200.0mV/20V DC input. Compact, LED
DPM with black plastic face. .56" character height, adj.
decimal point, auto polarity, >1Mohm input imp. 2
readings/sec., .2% accuracy. Snap-in panel mounting.
Header connector for input/output. (Includes mating
connector with leads.)
DIP Switch for Decimal point, Differential input, and
100X input (Switch "ON" for 20V input) selection.
5 VDC powered, Meter power and Input can share a
common Ground (-input/-Power)
EXCEPT in "Differen-
tial" mode.
W: 72mm H: 36mm D: 27mm WT: .13
16565-ME Mini 5VLED Panel Meter $9.95
STOCK # DESC. 1EA
DUAL RANGE
LED
PANEL METER
200.00mV DC input, Compact
4-1/2 Digit LCD DPM with
black plastic face. 3/8" char-
acter height, adj. decimal point, auto polarity,
>100Mohm input imp. 2 readings/sec., .05% accuracy.
Through panel mounting. Holes on board to add scale
resistors. 9V powered, Meter power must be isolated
from input (Cannot monitor own power source).
4-1/2 DIGIT
PANEL METER
W: 2-5/8" H: 1-3/4" D: 1/2" WT: .1
7160-ME 4-1/2 Digit Panel Meter
$18.95 $17.95
12073-RS 20V Resistors $1.00 $0.90
12074-RS 200V Resistor $1.00 $0.90
STOCK # DESC. 1EA 10+EA
LED DIGITAL
PANEL METER
W: 2-5/8" H: 1-3/4" D: 3/8" WT: .1
7516-ME LED Panel Meter
$11.95 $10.95
12073-RS 20V Resistors $1.00 $0.90
12074-RS 200V Resistor $1.00 $0.90
STOCK # DESC. 1EA 10+EA
3-1/2 Digit LED DPM with black
plastic bezel & face plate. .56"
character height, 200mV DC in-
put, adj. decimal point, auto polarity, >100Mohm input
imp. 2 readings/sec.,
9V powered, .5% accuracy.
Through panel mounting. Holes on board to add scale
resistors.Meter power must be isolated from input
(Cannot monitor own power source).
ELENCO DC panel meters, Black
legends/Red over-ange, Plastic case. Back Mounts in
2" X 1-1/8" cutout NO MOUNTING HARDWARE
DC VOLT
PANEL METERS
W: 2-1/4" H: 1-7/8" D: 1-1/4" WT: .1
STOCK # DESC. 1EA 10+EA
5332-ME 0-15V DC Voltmeter $6.95 $6.59
5333-ME 0-30V DC Voltmeter $6.95 $6.59
5334-ME 0-40V DC Voltmeter $6.95 $6.59
GENERAL PURPOSE
VOLT & AMP
METERS
Quality general use panel
meters. Accuracy: 2-1/2%.
Black legends on white face.
Plastic case with "zero" adjustment. Front mounts in
1.772" (45mm) hole. Two mounting screws on diaognal.
W: 2-3/4" H: 2-1/4" D: 1-7/8" WT: .2
STOCK # DESC. 1EA
15320-ME A 10 A/50mV Shunt $6.95 $5.49
15321-ME A 25 A/50mV Shunt $6.95 $5.49
16360-ME A 30 A/75mV Shunt $6.95 $5.49
15322-ME A 50 A/50mV Shunt $6.95 $5.49
15324-ME A 10 A/100mV Shunt $6.95 $5.49
15431-ME B 100 A/50mV Shunt $7.95 $6.95
17298-ME C 100 A/50mV Shunt $7.95 $6.95
17299-ME D 100 A/100mV Shunt $7.95 $6.95
A: L: 4-3/4" W: 1" H: 3/4" WT: .2
B: L: 3-7/8" W: 3/4" H: 1-1/2" WT: .42
C: L: 3-5/8" W: 7/8" H: 1-1/2" WT: .34
D: L: 4-5/8" W: 7/8" H: 1-1/2" WT: .35
DC CURRENT
SHUNTS
STOCK # FIG DESC. 1EA 5+EA
Panel mount DC current shunts for use with 50mV or
100mV DC ammeters. Type A haveThermoplastic mount-
ing base with mounting holes. Screw terminals for input
& meter leads. B,C,D have bolts for input.
A
B,C,D
16555-ME 0-30V DC Voltmeter $7.95
17251-ME 0-50uA DC Ammeter $7.95
17252-ME 0-1mA DC Ammeter $7.95
17253-ME 0-5A DC Ammeter $7.95
17254-ME 0-15A DC Ammeter $7.95
16556-ME 0-30A DC Ammeter $7.95
16557-ME 0-150VAC Voltmeter $7.95
17255-ME 0-3A AC Ammeter $7.95
16558-ME 0-15AAC Ammeter $12.95
SWITCHBOARD PANEL METERS
Quality switchboard panel meters. Accuracy: 2-1/2%.
Black legends and pointer on white face with mirror
scale. Plastic case with "zero" adjustment. Front mounts
in 1-1/2" hole. Four mounting screws on 1-1/4" ctrs.
30A DC meter includes External Shunt. 5A AC meter
Includes external CT.
W: 2-3/16" H: 1-13/16" D: 1-1/2" WT: .16 (.35 for 30A)
STOCK # DESC. 1EA
17671-ME 0-15V DC Voltmeter $8.95
17672-ME 0-30V DC Voltmeter $8.95
17674-ME 0-3A DCAmmeter $8.95
17679-ME 0-30A DCAmmeter/Shunt $9.95
17681-ME 0-150V AC Voltmeter $8.95
17683-ME 0-5A AC Ammeter $9.95
ELENCO DC panel meters, Black
legends/Red over-range, Plastic case. Back Mounts in
2" X 1-1/8" cutout NO MOUNTING HARDWARE
DC AMP
PANEL METERS
W: 2-1/4" H: 1-7/8" D: 1-1/4" WT: .1
STOCK # DESC. 1EA 10+EA
5336-ME 0-3A DC Ammeter $6.95 $6.59
SWITCHBOARD
VOLT & AMP
METERS
Quality switchboard panel meters. Accuracy rated 2-1/
2%. Black legends on white face with red tip pointer.
Plastic case with "zero" adjustment. Front mounts in 2-
3/8" (60mm) hole.Two mounting screws. AC & DC
ranges. 30A DC meter includes Shunt.
W: 3-1/8" H: 2-1/2" D: 2-3/8" WT: .24
STOCK # DESC. 1EA 10+EA
8718-ME 0-15V DC Voltmeter $13.95 $12.95
8719-ME 0-30V DC Voltmeter $13.95 $12.95
8720-ME 0-50V DC Voltmeter $13.95 $12.95
8722-ME 0-150VAC Voltmeter $13.95 $12.95
8725-ME 0-100uA DCAmmeter $13.95 $12.95
8726-ME 0-1mA DCAmmeter $13.95 $12.95
8733-ME 0-30A DCAmmeter $15.95 $14.95
8735-ME 0-5A AC Ammeter $13.95 $12.95
8736-ME 0-15A ACAmmeter $13.95 $12.95
TECH. & INFO: CALL 561-848-8236 FAX [phone] [e-mail]
53
Visit www.mpja.com for our Complete Products Lines.
Quality oscilloscope probes with a BNC connector to
match to most equipment. Max Input: 600V AC P/P + DC.
Impedance: 1X= 1M ohm: 10X= 10M ohm. With ground
lead & retractable hook tip, IC tip.
For field service, schools or shop.
20MHz PROBE: Bandwidth:1X = >15MHz +-3db.
10X=>20MHz +-3db: Capacitance 1X = 46pF; 10X =
15pF, (+ scope input)
40MHz PROBE: Bandwidth:1X = >15MHz +-3db.
10X=>40MHz +-3db: Capacitance 1X = 46pF; 10X =
15pF, (+ scope input)
60MHz PROBE: Bandwidth: 1X = >15MHz +-3db
10X=>60MHz +-3db: Capacitance 1X = 46pF; 10X =
15pF, (+ scope input).
100MHz PROBE: Bandwidth: 1X = >6MHz +-3db
10X=>100MHz +-3db. Capacitance 1X= 150pF; 10X = 14pF,
(+ scope input).
200MHz PROBE: Bandwidth: 1X = >10MHz +-3db.
10X=>200MHz +-3db: Capacitance 1X = 46pF; 10X =
11pF, (+ scope input):
L: 1.2m WT: .2
SCOPE PROBES
SELECTABLE 10X
OR 1X
STOCK # DESC. EA
Quality 250MHz oscilloscope
probes with a BNC connector
to match to most equipment.
Impedance: 100X= 100M
ohm. With ground lead & retractable hook tip, IC tip.
For field service, schools or shop. CEListed
1.2KV PROBE: Working Voltage: 1,200VDC + Pk AC.
Bandwidth: 100X = >250MHz +-3db. Capacitance 1X =
6.5pF(+ scope input)
250MHZ HV
SCOPE PROBES
18147-TE 1.2KV 250MHZ Probe $34.95
STOCK # DESC. 1EA
2.0KV PROBE: Working Voltage: 2,000VDC + Pk AC.
Bandwidth: 100X = >250MHz +-3db. Capacitance 1X =
6.5pF(+ scope input)
L: 1.2m WT: .2
STOCK # DESC. 1EA
18148-TE 2.0KV 250MHZ Probe $38.95
STOCK # DESC. 1EA
L: 1.2m WT: .2
15085-TE 20MHz Probe $7.95 any qty.
15086-TE 40MHz Probe $8.95 any qty.
8630-TE 60MHz Probe $9.95 any qty.
8682-TE 100MHz Probe $15.95 any qty.
15087-TE 200MHz Probe $18.95 any qty.