Specifications

MFG: SHINANO KENSHI
P/N: STP-58D4002-03
COIL: 3VDC/.42ohms
TYPE: 2 Phase Bi-Polar 4 lead
STEP ANGLE:1.8 deg
7mm dia. X 18mm steel shaft with a pressfit 1-1/2” dia.
36 tooth, sintered steel cog belt gear. Ball bearings, 3"
leads, 4 corner mounting holes threaded M4.5, Remov-
able steel mtg. bracket
3V/ 1.8Deg.
STEP MOTOR
L: 2-5/8"(Body) SQ: 2-3/16" WT: 2.2
17153-MS 3V SKC Step Motor
$14.95 $12.95
STOCK # DESC. 1EA 10+EA
Removed from new equipment, Motor assembly with a
Buehler 1.61.046.531.00 Gearhead motor driving a
110mm (4-5/16") long lead screw. 85mm (3-1/4") Max
travel, 4.3mm (1-11/16")/Rev. Plastic travler with remov-
able steel bracket.
Approx. 105RPM/6VDC, 50 Slot Photo Tach. (5V pow-
ered) on rear motor shaft, steel base plate.
LEAD SCREW
MOTOR ASSEMB.
L: 9-3/8" O/A W: 6"O/A WT: 2.3
17265-MD Lead Screw Motor Assembly
$29.95
STOCK # DESC. 1EA
P/N: CW230
INPUT: 24-36VDC
OUTPUT: Selectable up to 3A max.
STEP ANGLE: 1.8 deg:200steps/Rev.
Microstep: 1/2-1/4-1/8-1/16-1/32-1/64
Full bridge driver for hybrid stepmotors.
Switch Selectable output current.
Over temp & Output miswire Protected.
Opto isolated Step pulse input (Clock input +5V Level).
Opto Isolated Direction input ( +5V Level)
Opto Isolated Reset input ( +5V Level)
Terminal strips in/out.
L: 4-5/8" W: 2-3/4" H: 1-3/8" WT: .7
STOCK # DESC. 1EA
17451-MS CW230 Stepmotor Driver $48.50
STEP MOTOR
DRIVER
L: 2"Body Sq: 1-5/8" WT: .84
STOCK # DESC. 1EA
17453-MS CW Size 42 Stepmotor $15.95
P/N: 42BYGH4806
COIL: 52VDC/52 Ohms/5.2mH
TYPE: 4 Phase Uni-Polar 6 lead
STEP ANGLE:1.8 deg
New step motor, 3200g.cm holding
torque. 5mm X 22mm steel shaft. 4 corner m3 threaded
mtg. holes. 24" leads.
L: 1-5/8" Body Sq: 2-3/16" WT: 1
STOCK # DESC. 1EA
17454-MS 24V/1.8
O
Stepmotor $17.95
P/N: 57BYGH006
COIL: 24VDC/71 Ohms/90mH
TYPE: 4 Phase Uni-Polar 6 lead
STEP ANGLE:1.8 deg
New step motor, 4400g.cm holding
torque. 6.35mm (.25") X 19mm (.75") steel shaft. 4 corner
mtg. holes. 24" leads.
L: 5-3/4" W: 3-3/4" H: 1-3/4" WT: 1.5
STOCK # DESC. 1EA
17452-MS CW250 Stepmotor Driver $49.95
P/N: CW250
INPUT: 20-60VDC
OUTPUT: Selectable up to 5A max.
STEP ANGLE: 1.8 deg:200steps/Rev.
Microstep: 1/8: 1600 steps/Rev.
Full bridge driver for hybrid stepmotors. Switch Select-
able output current. Over temp & Output miswire Pro-
tected. Opto isolated Step pulse input (Clock input +5V
Level). Opto Isolated Direction input ( +5V Level)
Terminal strips in/out.
STEP MOTOR
DRIVER
52V/1.8
O
STEP
MOTOR
24V/1.8
O
STEP
MOTOR
L: 2-3/8" Body Sq: 2-3/16" WT: 1.6
STOCK # DESC. 1EA
17455-MS 6.2V/1.8
O
Stepmotor $14.95
P/N: 57BYGH213
COIL: 6.2VDC/6.2Ohms/10mH
TYPE: 4 Phase Uni-Polar 6 lead
STEP ANGLE:1.8 deg
New step motor, 9000g.cm holding
torque. 6.35mm (.25") X 19mm (.75")
steel shaft. 4 corner mtg. holes. 24" leads.
6.2V/1.8
O
STEP
MOTOR
L: 2-3/8" Body Sq: 2-3/16" WT: 2.6
STOCK # DESC. 1EA
17456-MS CW 3.6V Stepmotor $34.95
P/N: 57BYGH405A
COIL: 3.6VDC/1.2Ohms/2.4mH
TYPE: 4 Phase Uni-Polar 6 lead
STEP ANGLE:1.8 deg
New step motor, 21Kg.cm holding
torque. 6.35mm (.25") X 19mm
(.75") steel shaft. 4 corner mtg.
holes. 24" leads.
3.6V/1.8
O
STEP
MOTOR
L: 6" Body Sq: 3-3/8" WT: 11
STOCK # DESC. 1EA
17457-MS 7.8V/1.8
O
Stepmotor $79.95
P/N: 85BYGH450C-01
COIL: 7.8VDC/3.9Ohms/24mH
TYPE: 4 Phase Uni-Polar 6 lead
STEP ANGLE:1.8 deg
New, heavy duty step motor, 63Kg.cm
holding torque. 13mm (.55") X 35mm
(1-3/8") steel shaft. 4 corner mtg.
holes.
7.8V/1.8
O
STEP
MOTOR
ORDERS: CALL 800-652-6733 FAX [phone] WWW.MPJA.COM
48
Visit www.mpja.com for our Complete Products Lines.
MOTORS/DRIVERS
MFG: MINEBEA
P/N: 23KM-K102-P1V
COIL: 3A/1ohm/2.2mH
TYPE: 2 Phase Bi-Polar 4 lead
STEP ANGLE:1.8 deg
8mm dia. X 18mm steel shaft with a pressfit 13/16” dia.
18 tooth, aluminum cog belt gear. Ball bearings, 6pin
connector ( supplied), 4 corner mounting holes threaded
M4.5
1.8Deg.
STEP MOTOR
L: 2-5/8"(Body) SQ: 2-3/16" WT: 1.9
16320-MS 1.8 Minebea Step Motor
$12.95 $10.95
STOCK # DESC. 1EA 16+EA
L: 3" Body Sq: 3-3/8" WT: 4.7
STOCK # DESC. 1EA
17458-MS 3V/1.8
O
Stepmotor $54.95
P/N: 85BYGH450A-04
COIL: 3VDC/1Ohms/4.05mH
TYPE: 4 Phase Uni-Polar 6 lead
STEP ANGLE:1.8 deg
New, heavy duty step motor,
23Kg.cm holding torque. 13mm
(.55") X 35mm (1-3/8") steel shaft. 4 corner mtg. holes.
3V/1.8
O
STEP
MOTOR
THOUSANDS
more Items on www.mpja.com
COMPUTER MONITOR TESTER
Model MT-830, Light weight multifunc-
tion, hand held test set for computer moni-
tors. 9V battery powered. Simple set up,
only three switches used to select monitor.
DB-9 & DB-15HD connectors.
SPECIFICATIONS
Monitor Types:
MDA, CGA,EGA,VGA3,SVGA,8514/A,
Test Rates:
Mon. -----Horiz----- -----Vert-----
Video
Type KHz Polarity Hz Polarity Lines Type
MDA 18.4 + 50 - 350 TTL
CGA 15.7 + 60 + 200 TTL
EGA21.8+60-350 TTL
VGA 31.5 - 60 - 480 Analog
SVGA 35.2 + 56 + 600 Analog
SVGA 48.5 + 60 + 768 Analog
SVGA 64 + 60 + 1024 Analog
8514 35.5 + 87 + 384 Analog
Video Patterns:
Color Bars,Crosshatch,Dots,Color Raster, Black/White
window.
L: 5.7" W: 3.8" T: 1.5" WT: .6
7792-TE Monitor Tester
$119.95 $99.95
STOCK # DESC. 1EA 5+EA
Johnson 24 VDC motor with
Bronze sleeve bearings. Simi-
lar to HC685LG. Used in tools &
appliances etc. 4600+RPM, /.08A, no
load, 3A Stall @ 24V. 1/8" [Dia.] X 7/16"
steel front shaft with 1/2" Dia. 14Tooth Brass gear, 1/8"
Dia. X 5/16" rear shaft. Rear mounted removable circuit
board with 4 Pin mini header and a PTC resetable fuse
(1.3A hold). Two m3.3 tapped mounting holes in front.
24 VDC
MOTOR
L: 2-1/2" (Body) Dia: 1-1/2" WT: .6
17948-MD 24VDC Johnson Motor
$3.95
STOCK # DESC. 1EA
MFG: SHINANO KENSHI
P/N: STH-39D191
COIL: 10.8VDC/57ohm
TYPE: 2 Phase Uni-Polar 5 lead
STEP ANGLE: 1.8 deg (Motor)
Assembly#: 127K94441
5mm dia. X 12mm serrated steel shaft with sleeve
bearings, 4in leads. Removable 1/2” dia. 24 tooth,
plastic gear driving a 39 tooth gear. Removable bracket
with mtg. ears. 4 corner m3X0.5 threaded mounting
holes (Motor). Includes a Omron Opto-interrupter
Motor: L: 1-1/4" X 1-1/2" Sq.
1.8
O
STEP
MOTOR
17989-MS Shinano 10.8V Step Motor Asb. $3.95
STOCK # DESC. 1EA
L: 4-1/16" W: 2-3/8" H: 3-1/8" WT: .52
Johnson 13.6VDC motor with
Bronze sleeve bearings. Used in tools &
appliances etc. 6100+RPM, .44A, no load, @
13.6V. Max Torque: 6.1oz/in @ 13.6V/2.8A 1/8" [Dia.] X
3/4" serated steel shaft. Solder terminals. 2 mounting
holes threaded M3 on front.
13.6 VDC 6100RPM
MOTOR
L: 2-5/8" (Body) Dia: 1-1/2" WT: .47
17943-MD 13.6VDC Johnson Motor
$3.95
STOCK # DESC. 1EA
360
O
VIEW
@MPJA.COM
360
O
VIEW
@MPJA.COM