Specifications

STOCK # DESC. 1EA 10EA
MFG: ITT AUTOMOTIVE
P/N: 402.757
COIL: 12VDC
Gearhead DC motor rated 17RPM @ 12V/34RPM @ 24V.
6mm dia. X 18mm flatted steel shaft. Plastic gearcase
with 4 corner mounting holes. 4" leads.
L: 3-1/4" (Body) W: 1-3/8" H: 1-1/2" WT: .44
16069-MD 12VDC 17RPM Motor
$22.95 $19.95
12VDC 17RPM
MOTOR
MFG: SHINANO KENSHI
P/N: STP-58D4002-02
COIL: 3VDC/.42ohms
TYPE: 2 Phase Bi-Polar 4 lead
STEP ANGLE:1.8 deg
7mm dia. X 18mm steel shaft with a pressfit 13/16” dia.
18 tooth, sintered steel cog belt gear. Ball bearings, 3"
leads, 4 corner mounting holes threaded M4.5
3V/ 1.8Deg.
STEP MOTOR
L: 2-5/8"(Body) SQ: 2-3/16" WT: 2
16235-MS 3V SKC Step Motor
$14.95 $12.95
STOCK # DESC. 1EA 10+EA
MFG: SHINANO KENSHI
P/N: STP42D4009
COIL: 3V/1.6 ohm
TYPE: 2 Phase Uni-Polar 6 lead
STEP ANGLE: 1.8 deg 120step/rev
5mm dia. X 24mm steel shaft with metal 20 tooth X 11/
16" dia. gear & 22 tooth X 9/16" dia. cog belt pully. 4
corner m3x0.5 mounting holes. 5" leads.
3V 1.8DEG. STEP
MOTOR
L: 1-5/8" (Body) SQ: 1-9/16” WT: .64
STOCK # DESC. 1EA
16231-MS 1.8Deg. Step Motor $7.95
MFG: SANYO DENKI
P/N: 103G770-1856
COIL: 3.5V/1.5A/2.4ohm/2.9mH
TYPE: 2 Phase Bi-Polar 6 lead
STEP ANGLE:1.8 deg
6.5mm dia. X 18mm steel shaft with a
pressfit 3/4” dia. 25 tooth, plastic cog belt gear. Ball
bearings, 5in leads. Removable anti-vibration bracket
with mtg. ears. 4 corner mounting holes (motor).
1.8Deg.
STEP MOTOR
L: 2-1/8"(Body) SQ: 2-3/16" WT: 1.3
16321-MS 1.8 Sanyo Step Motor
$9.95 $8.95
STOCK # DESC. 1EA 8+EA
DC MOTOR SPEED
CONTROL KIT
L: 3" W: 2-3/8" H: 1-3/4" WT: .63
16925-KT DC Speed Control Kit
$15.95 $14.95
12V DC motor or lamp control
kit. Will control any 12V DC
load up to 5A. uses pulse
width mod. to give 5% to 98%
control range. Kit contains all
parts and a 12 V DC demo motor. Ideal for DC tools,
science fair projects.
STOCK # DESC. 1EA 5+EA
MFG: SANYO DENKI
P/N: 103H7121-0415
COIL: 2A/1.25 ohm/1.9mH
TYPE: 2 Phase Uni-Polar 6 lead
STEP ANGLE: 1.8 deg 120step/rev
6mm dia. X2 4mm serrated steel front shaft with plastic
16 tooth X 1/2" dia. worm gear (removable). 6mm X
10mm smooth back shaft. removable 3/8" thick steel/
rubber shock mounting plate with 4 corner mounting
holes. 3" leads.
1.8DEG. STEP
MOTOR
L: 2" (Body) SQ: 2-3/16” WT: 1.2
STOCK # DESC. 1EA
16817-MS 1.8 Deg. Sanyo Motor $6.95
MFG: BUEHLER
P/N: 1.61.046.112.00
COIL : 12-24VDC
Gearhead DC motor rated 700RPM @
24V/360RPM @ 12V with 6oz/in torque load.
5mm dia. X 10mm flatted steel shaft. 3 metric (M3)
threaded mounting holes. 3" leads.
L: 3-1/2" (Body) Dia: 1-3/8" WT: .56
12V 360 RPM
MOTOR
16815-MD 12V-24VDC Gear Motor $12.95
STOCK # DESC. 1EA
CARRIAGE WHEEL
7-1/4" Dia. plastic wheel. White
hard plastic hub with a black plas-
tic tire. 3/4" tire width, 11/16" dia.
X 1-1/8" hub bored for 5/16" shaft.
Dia: 7-1/4" WT: .4
STOCK # DESC. 1EA
16767-MI 7in. Plastic Wheel $1.99
ORDERS: CALL 800-652-6733 FAX [phone] WWW.MPJA.COM
46
MOTORS
Visit www.mpja.com for our Complete Products Lines.
MFG: ASTROSYN
P/N: 23KM-K213-P7V
COIL: 3VDC/1.8 ohms/2.6mH
TYPE: 2 Phase Uni-Polar, 6 lead
STEP ANGLE: 1.8 deg
1/4" [Dia.] X 1" steel shaft with press fit steel COG belt
pully. Four corner mounting holes. 4" leads.
17276-MS Astrosyn 1.8Deg. Stepmotor $10.95
STOCK # DESC. 1EA
L: 1-3/4" (Body) SQ: 2-3/16" WT: 1.1
3V/ 1.8Deg.
STEP MOTOR
USED, Motor assembly with a 24VDC
motor driving a COG belt & pulley
that in turn drives Worm & gear
assembly.
Approx. RPM @ 24VDC NL:
Motor: 3380, Worm gear: 1650, Spur gear: 116.
Plastic gears with steel shafts, Bronze sleeve shaft &
motor bearings. PC board on motor terminals with noise
filters. Steel frame, 5in. wire leads with ferrite filter.
Included is Spur gear without a shaft that matches
output spur gear.
Motor COG Belt Pully .478"
Jack Shaft COG Belt Pully: .975" Jack Shaft: .309"
Output Spur Gear: .608"
loose Spur Gear: 1.527" O/D .320" I/D
24V MOTOR & BELT
DRIVE ASSEMB.
L: 3-1/2" O/A W: 3-1/2"O/A H: 3-1/2" O/A WT: 1.1
17294-MD Belt Drive24V Motor
$9.95 $8.95
STOCK # DESC. 1EA 10EA
MFG: SHINANO KENSHI
P/N: STP-42D241
COIL: 12V/3.1 ohm/2.9mH
TYPE: 2 Phase Uni-Polar 6 lead
STEP ANGLE: 1.8 deg 200step/rev
5mm dia. X 24mm steel shaft with metal 20 tooth X 11/
16" dia. gear & 22 tooth X 9/16" dia. cog belt pully. 4
corner m3x0.5 mounting holes. 5" leads.
1.8DEG. STEP MOTOR
L: 1-5/8" (Body) SQ: 1-9/16” WT: .64
STOCK # DESC. 1EA
17757-MS 1.8 Deg. 12V Step Motor $6.95
Set of 4 Faultless Plate cast-
ers, 2 with brake & 2 plane.
Rated load of 100lb/caster.
Twin 60mm dia. plastic wheels offer in-
dependent rotation for use on carpeting or tile. 2-1/2"
square steel top plate with 2 holes.
H: 3" O/A T: 1 WT: 1.1
17343-HD Plate Caster 4 Pc. Set
$8.95
DUAL WHEEL
CASTER-SET
STOCK # DESC. 1EA
Removed from new
equipment, Motor as-
sembly with a Buehler
1.61.046.520.01 Gearhead motor driving a re-
ciprocating 4-7/8" removable plastic arm. 7/8"Stroke.
115 Strokes/Min @ 6V/ 230 @ 12V/460 @ 24V
12 Slot Photo sensor on rear motor shaft, 2 Slot Photo
sensor on Cam plate. Removable steel base plate
RECIPROCATING
MOTOR
ASSEMB.
L: 9-3/8" O/A W: 6"O/A WT: 2
17264-MD Reciprocating Motor
$24.95 $19.95
STOCK # DESC. 1EA 10EA
MFG: BUEHLER
P/N: 1.61.031.119.00
COIL : 12VDC/
USED, 90Deg. Angled
gearhead DC motor rated:
10/21/42RPM @ 6/12/24VDC,
300mA No Load/4.5A Stall @ 12V. Has 5VDC, TTL
Compatable, 50Pulse/RPM Tach. mounted on rear.
8mm dia. X 50mm removable/reversable steel shaft
held in place by a collet. Removable sheet metal mtg.
bracket. 5" Tach leads, 8" motor leads.
L: 8-1/2" (OA) W: 4-1/4" H: 3" WT: 2.9
21RPM 12VDC
MOTOR/TACH
17249-MD 12V 21 RPM Motor/Encoder $36.95
STOCK # DESC. 1EA
MFG: SHINANO KENSHI
P/N: STH-56D309
COIL: 2.88VDC/2.4A
TYPE: 2 Phase Uni-Polar 6 lead
STEP ANGLE: 1.8 deg (Motor)
Assembly#: 127K80020
6.5mm dia. X 22mm steel shaft with a
rollpinned 3/4” dia. 22 tooth, plastic cog belt gear. Ball
bearings, 5in leads. Removable anti-vibration bracket
with mtg. ears. 4 corner mounting holes (motor).
2.88V STEP MOTOR
17504-MS Shinano 2.88V Step Motor $12.95
STOCK # DESC. 1EA
L: 2-1/4"(Body) SQ: 2-3/16" WT: 1.5
MFG: NPM
P/N: PFC55-48B1
COIL: 24V/14ohm
TYPE: 2 Phase Uni-Polar 6 lead
7.5 Degree step angle. 2.2mm dia. X 15mm steel shaft
with a 8 tooth 1/4" dia. X .187" long brass spur gear. 2
mounting holes. 10" leads. Includes a matching pitch
steel 32 tooth gear for a 7/32" shaft
Dia: 55mm(Body) 76.2 O/A D: 25mm (1") WT: .62
STOCK # DESC. 1EA
18086-MS 24V Nippon Step Motor $4.95
STOCK # DESC. 1EA
24V 7.5 DEG.
STEP MOTOR
MFG: MOLON
P/N: CHM-2435-1
Voltage: 24VDC
RPM: 45
Reversable DC gearhead motor with
5/16" dia X 5/8" long steel shaft.
Mounted on shaft is 4-7/8" dia. plastic
wheel with "O" ring in wheel rim for use
as friction drive. 45RPM/50mA @24VDC No Load; 1A/
7.5in-lb torque @ Stall. 7in. leads.
24 VDC GEARMOTOR
L: 2-1/2" (Body) W: 2-3/4" H: 3" WT: .9
17971-MD 24VDC Gear Motor
$9.95 $8.95
STOCK # DESC. 1EA 10+EA
360
O
VIEW
@MPJA.COM