Instruction manual

- 20 -

4.1 Text Input

There are certain circumstances that the system requires the user to enter text, such as

system login, camera title setup, and so on. Please follow the steps below to enter

text:

(1) Press ENTER to edit the highlighted option. The flashing cursor will be shown

to indicate the editing point.

(2) Press ◄► to move the cursor to the left/right.

(3) Press code in text editing mode to change text case. (If this entry can accept

number only, pressing code will have no effects.) Indicators on the screen show

the current setting:

123 = Number only

abc = No capital letters

ABC = All capital letters

CODE = Internal code for the selected language, such as Chinese, Japanese, etc.

(4) Press a number key (1-9, 0) repeatedly until the character you want appears. (1

for 1 or space, 2 for 2, a/A, b/B, or c/C, the others as shown on the keypad) If

internal CODE is selected, a CODE box will be shown (after the first code is

entered) for each new code to be entered. Please check the internal code table

for the selected language. For 2-byte code, e.g. Chinese or Japanese, the code

accepted is from 0000 - FFFF.

(5) Press mark to bring up a list of punctuation marks and special characters. The

highlighted character in the list shows the selected one. Press ▲▼◄► to

change the selection.

(6) If you make a mistake, press BS to remove the character to the left of the cursor,

or press DEL to delete the character at the current cursor position.

(7) In text editing mode, internal code box, and mark list, press ENTER to exit and

save changes, press ESC to exit without making changes.

4.2 Login And Logout

There are three password levels in the system, including Administrator (highest),

Supervisor, and Operator (lowest). If the user does not login the system, he/she

will be treated as “Guest” and can only view live video display.

The system allows up to 18 user accounts. The administrator can set up the login

name and password for each user. (Please refer to Section 6.7

for Password Setup.)

SCW-7709 & SCW-7716 Users Manual