Specifications

Port Name Connection Function

eSATA eSATA port / External SATA port. It can connect to the

device of the SATA port. Please jump the

HDD when there is peripheral connected

HDD.

USB port.

Connect to USB mouse.

RS232(RS-422) RS232 debug

COM.

It is for general COM debug to configure IP

address or transfer transparent COM data.

HDMI High Definition

Media

Interface

High definition audio and video signal output

port. It transmits uncompressed high

definition video and multiple-channel data to

the HDMI port of the display device.

VGA VGA video

output port

VGA video output port. Output analog video

signal. It can connect to the monitor to view

analog video.

2.3 Alarm Connection

Please refer to the steps listed below.

z Connect the alarm input device to the alarm input port.

z Connect the alarm output device to the alarm output port. The NO and NC alarm output

device can connect to the NO/C/NC port. For the NO alarm device, please connect to the

NO/C ports. For the NC alarm device, please connect to the NC/C ports. Please note the

NO/C ports are for NO alarm device only.

z Open Web, and go to the Alarm setup interface to set the alarm input and output. The alarm

01 is corresponding to the first channel of the device I/O port and so on. Please set the

NO/NC type according to the high/low level the alarm input device generated when an alarm

occurred

z Set the alarm output on the Web. The alarm output 01 is corresponding to the first group of

alarm out put port.

2.4 Bidirectional talk

2.4.1 Device-end to PC-end

Device Connection

Please connect the speaker or the pickup to the first audio input port in the device rear panel.

Then connect the earphone or the sound box to the audio output port in the PC.

Please refer to the following interface to enable bidirectional talk. See Figure 2-28.