User`s manual

36
Figure 2-8
Please refer to the following sheet for front panel button information.
SN
Name
Icon
Function
1
Power button
Press it once to turn on the device.
Press it for a long time to turn off the device (Usually
we do not recommend).
Press power button for a long time or pull out the
power cable may result in device auto restart.
2
System HDD
Indication light
The blue light flashes when system is reading or
writing the system HDD.
In the system HDD, there are device important
configuration file, factory default configuration file,
device initial boot up data.
3
Alarm indication
light
The alarm indication light becomes on once an alarm
occurred. It becomes on via the software detection.
The alarm includes local alarm, no disk and etc.
4
Network indication
light
The network indication light is blue and it flashes
when you connect the device to the network.
5
USB2.0 port
Connect to USB2.0 storage device, mouse, USB
burner and etc.
6
16 HDD slot
-
/
After you remove the front panel, you can see there are 16 HDDs. From the left to the right and from the
top to the bottom, it ranges from 1~4, 5~8, 6~12, 13~16. See Figure 2-9.
You can see there are two indication lights on the HDD bracket.
 The power indication light is at the top. The light is yellow after you connected the device to the
power.
 The read-write indication light is at the bottom. The blue light flashes when system is reading or
writing the data.