Specifications

31
Network
abnormal
indication light
Net
Network error occurs or there is no n
etwork connection, the
light becomes red to alert you.
Record light 1-16
System is recording or not. It becomes on when system is
recording.
IR Receiver IR
It is to receive the signal from the remote control.
ESC Esc
z Go to previous menu, or cancel current operation.
z When playback, click it to restore real-time monitor
mode.
Enter Enter
z Confirm current operation.
z Go to default button.
z Go to menu.
Assistant Fn
z One-window monitor mode, click this button to display
assistant function: PTZ control and image color.
z Backspace function: in numeral control or text control,
press it for 1.5seconds to delete the previous character
before the cursor.
z In motion detection setup, working with Fn and
direction keys to realize setup.
z In text mode, click it to switch between numeral,
English character (small/capitalized) and etc.
z Realize other special functions.
shift Shift
z In textbox, click this button to switch between numeral,
English (Small/Capitalized), donation and etc.
z During tour process, enable/disable tour.
z Click it to auto adjust resolution after device booted up.
Record Rec
Manually stop/start recording, working with direction keys
or numeral keys to select the recording channel.
2.1.7 NVR-ELC-32 Series The front panel is shown as in Figure 2-8.
Figure 2-8
Please refer to the following sheet for front panel button information.
Name Icon Function
Power button
Power button, press this button for three seconds to boot up
or shut down
DVR.