Specifications

70
3.5 NVR-EL-16 & NVR-ELC Series
① Use the screwdriver to loose the screw
s of the rear panel and then remove the front cover.
② Put the HDD to the HDD bracket in the chassis and then line up the four screws to the four
holes
in the HDD. Use the screwdriver to fix the screws firmly to secure HDD on the HDD
bracket
③ Connect to the HDD dat
a cable to the main board and the HDD port respectively. Loosen the
power cable of the chassis and connect another end of the power cable to the HDD port.
④ After connect the cable, put the
front cover back to the device and then fix screws of the rear
panel.