Spec Sheet

TIMER MODEL - TM-2 MULTI-FUNCTION (cont’d)
Architectural Specifications
A. The Timer shall be produced by an ISO 9001 certified manufacturer.
B. The timer shall operate on 12 or 24 volts AC or DC
C. The Timer shall have a 5 Amp rated DP/DT dry contact output.
D. The timer shall have multiple DIP switch programmable functions (i.e. on delay,
triggered on delay, off delay, one shot, pulse output, toggle mode, and cyclic
mode).
E. Delay times shall be set in seconds or minutes with a maximum setting of 255
minutes and a minimum setting of 1 second.