Spec Sheet

Protect and enhance the performance
of access control devices and systems
with Securitron AQ Power Supplies.
Mix & Match UL Listing
• Available in one to 16 Amp variants to support the smallest single door
systems to the largest enterprise access control systems
• UL listed dynamic field configurable product offering
• Combine any of the seven power supplies and nine distribution boards
in any UL listed enclosure and maintain UL code compliance
Protection & Efficiency
• Heavily filtered and regulated output provides better-than-linear performance
• Up to 93% efficiency, which results in decreased operating
costs which lengthens the lifespan of electronics
• Low battery cutoff protects readers and other sensitive components from under-voltage
Friendly & Knowledgeable Support
• Customer Service and Technical Support offer tools and
resources to address questions of all shapes and sizes
• Free, custom wiring diagram support available
• No-fault, no questions asked warranty covers installation errors
Protection | Efficiency | Support
Specifications
Certifications (Both)
• UL294 Listed
• UL603 Listed
• ULC-S318 Listed
• ULC-S533 Listed
• RoHS Compliant
• REACH Compliant
Electrical
• 115 or 230 VAC input (except AQD1)
• Supports up to two (2) sealed gel, AGM
or wet lead acid batteries
• Up to 93% efficiency
• Low noise design with ripple as low as 70mV p-p
• Outputs are Class 2 limited when used with
PTC polyswitch distribution boards
• Dual voltage 12 or 24 VDC field
selectable continuous output
• Single voltage 12 or 24 VDC continuous output
Operating Temperature
• -4° to 122°F [-20° to 50°C]
Dimensions
• 14" x 14" x 4-3/4"
[355.6mm x 355.6mm x 120.65mm]
Shipping Weight
• 12.7 lbs [5.76kg]
Features
• All combinations of AQ power supplies and
distribution boards are UL Listed
• Tolerates brownout or over-voltage
input ± 15% of nominal voltage
• Thermal shutdown protection with auto restart
• Circuit breaker protects against
over-current and reverse battery faults
• Integrated or dedicated battery charging circuit
prevents over-voltage on locking devices
• Expandable up to 16 outputs in the standard enclosure
• Available with a single relay fire trigger or
individually triggered relayed outputs
• Low battery cutoff at 9V for all except AQD1*
*Battery disconnect module available. Please contact the factory.