Spec Sheet

ARCHITECTURAL SPECIFICATION – Electromagnetic Lock Model 62
2.x MAGNETIC LOCKS
A.
All electromagnetic locks shall be manufactured by Securitron Magnalock Corp., Sparks, NV,
an ISO 9001 certified manufacturer.
B. Locks shall be capable of providing a pull-apart or tensile holding force of at least 1,200
pounds. A laboratory test certifying the minimum holding force shall be submitted by the
manufacturer upon request.
C. Electromagnetic locks shall have a lifetime replacement warranty.
D. Locks shall be dual voltage with no field adjustment necessary to select voltage.
E. Locks shall not consume more than three and (3 W) watts of power (250mA @ 12VDC) and
(150mA @ 24VDC).
F. Locks shall not exceed 42 cubic inches (8 inches x 3 inches x 1.75 inches) in size.
G. Locks shall be fully sealed in resin to provide tamper and weather proofing.
H. Mount locks using two .25 inch x 2.25 inch machine screws into blind finishing nuts with steel
threads that extend through the entire body of the lock.
I. Mount strike plates to provide a "floating" movement to assure automatic self-alignment with
the lock.
J. Finish is architectural brushed stainless steel, other finishes available by selecting optional
dress covers.
K. Hardware accessories shall include brackets, housings, and dress covers.
L. Ten feet of jacketed stranded conductor shall be provided for electrical connection.
M. Anti-tamper caps shall be provided for any exposed holes.
N. The locks and strikes shall be plated to provide corrosion resistance.