Installation Instructions

15
500
-1
0
42
0,
R
e
v
G
Figure 23. Connections for “BD” Version
Wire Double Door Status
NOTE: When two Magnalocks are used for double door installation, the
BondSTAT contacts should be wired in series for proper reporting.
1.
CONNECT the green wire of one lock to the white wire of the other as
shown in Figure 24, “Double Door Status Wiring.”
Figure 24. Double Door Status Wiring
Wire Double Door Status—DPS
NOTE: When two Magnalocks are used for double door installation, the
DPS contacts should be wired in series for proper reporting.
1.
CONNECT the blue wire of one lock to the yellow wire of the other as shown
in Figure 25, “Double Door Status Wiring—DPS.”
Figure 25. Double Door Status Wiring—DPS