Installation Instructions

Viewing System
Parameters on the
Securitron Netlink
Home Page
Before system parameters can be viewed, you
must be logged into the Securitron Netlink
board using the proper IP address, user name,
and password for the Securitron Netlink.
The Home page contains all of the real-
time parameters monitored directly by
the Securitron Netlink as well as status of
the connected devices. The Home page is
broken into several sections as follows.
Basic Site Information
The top portion of the Securitron Netlink
Home page lists the Client ID and Site ID (as
programmed on the Configure page) as well as
the system time and date. The Site ID field will
be green if there are no faults or service alerts
detected. This field will turn yellow on any fault
condition or blue on any service alert conditions.
Typical Securitron Netlink Home Page
32