User`s manual

© Securesight 2007 E&OE
25
If set to OFF the icon
will disappear from the LCD.
• Press the SET button to confirm and LCD will display
“ dONE ”, then enter into next setting.
5. Exit MODE setting:
• Press the MODE button repeatedly until the LCD flashes
“ ESC “
• Press the SET button to confirm and the LCD will display
“ dONE ”, the VL1 will start a 60 second countdown ready
to operate.
6. Other settings:
• Floodlight on timer control: Turn the time control knob to
“
+ “ side to increase the floodlight on time, turn the control
knob to “
– “ side to reduce the floodlight on time. Save
power by setting this low.
• Lux control: Turn the Lux control knob to “ SUN ” side; the
floodlight will turn on in brighter conditions.
• Turn the Lux control knob to “ Moon “ side; then floodlight
will not turn on until conditions are darker.