User`s manual

• The display will now change to “4.01.06” representing the

date in the format MM.DD.YY

• Press the SET button to set the MONTH followed by the

MODE button to confirm.

• Repeat this process to set the Day and Year.

• Still images will be stamped with the time and date you set

here.

 NOTE: Settings and images stored on internal memory

may be lost in the event of a power failure. Always

ensure you reset your VL1 following a loss of power.

4. Setting the flicker frequency 60Hz or 50Hz

By adjusting your VL1 to reflect the AC power frequency you

will eliminate any flicker effect on captured images.

For the UK this must be set to 50Hz.

• When VL1 is in TEST MODE, press the MODE button

repeatedly until the LCD flashes “ 60HZ ”