User`s manual

3. Set the Data and Time.

• After mounting your VL1 (with SD card already fitted if

required) connect the camera to the AC power. The

camera will turn on automatically and will begin to count

down ready to arm.

• Press the SET and MODE button together once to enter

TEST MODE, the LCD will display the word

“

t E S t ”.

• Press the MODE button

repeatedly untill the LCD

displays: “ T, 00-00 “ and

are flashing.

• Press the SET button

repeatedly to set the HOURS

• Press the MODE button to confirm.

• Now press the SET button repeatedly to set the MINUTES,

then press the MODE button to confirm.