User`s manual

© Securesight 2007 E&OE
12
NOTE: Picture / Image Capacity Chart shows the approximate
number of images or video clips that can be stored based on the
resolution setting and the size of memory card. These figures
may vary depending on the amount of detail in the image. Also,
when your memory card is full, your VL1 will begin overwriting the
earliest data ensuring you always have the most recent images.
Memory Options – Up to 1Gb SD card
Your VL1 lighting camera is equipped with 16MB built in SDRAM
memory. Please note:- data stored on internal memory may be
lost in the event of a power failure. We therefore recommend the
use of external memory using the media card slot capable of
accepting up to 1GB SD card (sold separately). With no memory
card inserted into the slot, the camera will use the built in 16MB
SDRAM memory. If a SD card is inserted into the slot then the
camera will bypass the built in memory and write to the SD
memory. It is not recommended that a card is inserted or removed
during operation as this can cause malfunction. The counter
display will show the number of images on the built in memory and
will change to show the number on a memory card if one is fitted.