Specifications

©Securesight 2009 E&OE Issue 1.0 Page No. 20
Floodlight light level
The light level at which the floodlight comes on is controlled in two ways
and is set using the Floodlight menu from within the Main Setup.
Auto The light is turned on when the camera
needs it and for as long as recording lasts.
LUX The light is turned on based on the
setting of the LUX and Time control.
When set to LUX mode, you can adjust the light level at which the
floodlight comes on by changing the position of the LUX setting on the
underside of the VL1.
Turn the LUX control to the + setting if you want the floodlight to come
on in brighter conditions.
Turn the LUX control to the – setting if you want the floodlight to come
on only in very dark conditions.
In AUTO mode, the LUX and Time settings are
ignored and the camera decides when and for how
long the light is turned on.