Specifications

Page No. 11 ©Securesight 2009 E&OE Issue 1.0
C. Set the time and date
Turn on the power. The floodlight will come on for a short time. The LED
will flash rapidly as the VL1 arms. When this flashing stops, your VL1 will
be ready to record whenever movement is detected – day or night.
Try to return to your VL1 without triggering the motion sensor.
NOTE: You can only access the menu when the unit is not recording.
Below is the Normal screen of your VL1 display. It shows the software
version, the number of recordings, the Image Mode and the Photo
Resolution.
To access the menu, press the menu key, – the
display will light up and will show:-
NOTE: When in a menu, if you do nothing for 20 seconds the software
will return to the normal screen.