Quick Start Guide

Mounting and adjusting the camera
Push the camera socket cables into the
wall through the center template hole.
Place the camera into the final mounting
position and fasten it securely to the wall
with the 3 included mounting screws.
Loosen the large adjusting nut at the
base of the camera. Adjust the camera to
the desired viewing angle, then tighten
the adjusting nut to lock the camera in
position.
Plug the power adapter into the outlet
(or Ethernet cable into the PoE switch)
to power up the camera.
Connecting to the camera
In the app, go to the Video or Settings > Video settings page and tap the circular
“+” button to launch the camera installation wizard.
Follow the instructions in the app to connect the camera to your account and
configure the network settings.