Quick Start Guide

Locate your AC mains power box and
switch o the circuit breaker to your
existing doorbell and chime.
Test your existing doorbell to confirm
the power is o. The chime should not
ring if the power is disconnected.
Remove the cover from the chime box.
Locate the terminals labeled TRANS
and FRONT. Loosen the screws and
disconnect both wires.
Installing the chime power kit
In your doorbell accessories, locate
the wireless power kit module and
connect it to the black and white
wiring harness via the small white
plug on the end.
Requires an existing mechanical chime or a digital chime with
TRANS and FRONT terminals