User Manual

Rev. 20190228A
To Contents 4 of 23
SecureDrive Features
Figure 1: The Drive Layout
LED INTERPRETATIONS
LEDs on the SecureDrive are represented here by colored icons.
LED
Meaning
(blink all
together once)
Plugged into computer; LED test
= Red solid
Locked; Momentarily preparing for next input; or failed procedure.
= Red blinking
1
Locked, ready for input (other than a Setting code). Also, specific feedback
1
= Red blinking with
Green solid
(Settings Mode) Locked & ready for keypad input within 10 seconds, or idle
for 30 seconds if procedure is done.
= Green blinking
Unlocked and ready for keypad input
= Green blinking
slowly
Unlocked for use in Read-Only Mode
Blue solid
Blue blinking
Drive is powered and when blinking is transferring data.
NOTE: The blue LED may be on or blinking during any procedure after
the Drive is unlocked.
= Green solid
Unlocked; operation was successful.
1
-For other LED combinations see specific status requests: Verifying Existing PIN and Determining the
Version Number described in this manual.