User's Guide

SecureDrive DUO User Guide • 10

20210715

Creating a Password

To begin using the Drive, you must create a password either through the onboard keypad or

through the mobile app.

To create a password using the onboard keypad, follow these steps:

To create a password using the app, follow these steps:

You will need the eight-digit Device ID to pair the app. It is located on top of the Drive where the

USB cable is inserted. To add the Drive, follow these steps:

To create a user password, follow these steps:

1. Connect the Drive to a computer.

2. Start the SecureData Lock App on your device.

3. After it initializes, tap the Drive name.

4. When prompted, enter the new password twice.

5. Enter a phone number for password recovery. You will also have the option to conﬁgure

password recovery later.

6. If you proceeded with Step 5, enter the conﬁrmation code sent to you via text.

NOTE: Use a mobile device when entering a number in the app to allow text messages.

NOTE: Per Step 5, for more information see Section 4: Basic Commands below.

1. Plug the Drive into a host.

2. Start the SecureData Lock App on your device.

NOTE: Ensure your device is Bluetooth-enabled.

3. If you have no paired drives, the new drive will automatically appear. If you have existing

paired drives, tap the plus sign in the upper left corner.

4. Tap the Drive Name.

NOTE: If a password has not been created, the Drive will appear in the Paired Drives menu

without asking for the device ID.

5. Enter the Device ID.

1. Press

. The LED displays on the Drive will show solid red and alternating blinking

blue and blinking green lights

, .

2. Press

. The LED will show a blinking blue light . Then enter a 7–64 digit

password.

3. Press

. You will see a blinking green light then re-enter the password.

4. Press .

5. If successful, you will see

, ﬁve times; if the command failed, you will see ,

ﬁve times.

Adding the Drive to the App (Pairing)

Creating a Password Creating a Password