User's Guide

OWL Installation and User Guide v1.1 27 August 2020
sa-owl user guide v1.2.docx SecureALL Corporation, Proprietary Page: 2/9
1. Purpose
1.1. This document provides instructions on how to install and use the SecureALL SA-OWL
upgraded Onity Panic Wall Reader product.
1.2. This document provides information about:
1.2.1. Product Installation
1.2.2. Product Operation – Magnetic Card Access
1.2.3. Product Operation – Keypad Access
1.2.4. Directions on how to interpret LED Blink sequence on lock
Note: This is a living document that will change over the product lifecycle.
2. Product Overview
2.1. SA-OWL is a retrofit kit for Onity’s CT30 Wall Reader controller (CT30WRC); Onity Model#
C3XDU10. It upgrades it to provide more functionalities including making it a wireless lock
with real-time communication with the SA-Guardian application server.
2.2. The retrofit involves following:
2.2.1. Using all parts of CT30WRC except its original controller IC.
2.2.2. Replace Onity’s CT30WRC micro-controller IC with SecureALL’s wireless controller
board with built in IC adapter
2.2.3. Add an outside mounted antenna
2.3. SA-OWL draws 5V DC power from OEM CT-30 Wall reader controller
2.4. When a credential card (that is allowed access to the door at prescribed day of week and time) is
presented to the CT30 Wall Reader, the unlock command signal is outputted by the CT30WRC.
2.5. The product dynamically discovers nearby SA-AP-200 router that in turn provides SA-OWL
with data communication connectivity with SecureALL’s SA-Guardian Application Server.
Figure 1: SA-OWL top and bottom view