User Manual

TrackerPAL™ Operations Guide RemoteMDx, Inc.
Copyright © 2006 RemoteMDx, Inc.
All rights reserved.
Page 7
Unit Interface:
Inputs: Button #1
Name: Call button
Location: Top left of unit when facing it
Feedback: Should provide a “click” sensation when depressed, and a simulate
“click on” / “click off” sound when depressed / released.
Button #2
Name: Reset button (optional; not populated by default)
Location #1: Push button on JTAG-Light Programming Board
Location #2: Bottom right corner at back of unit under back panel (not user
accessable)
Output LED's: LED #1
Name: Power LED
Location: Top right LED when facing unit
Color: Red / Amber / Green tri-color (one color lit at a time)
LED #2
Name: Alert LED
Location: Middle LED
Color: Red
LED #3
Name: Call Status LED
Color: Red
Location: Top left LED when facing unit (under Call Button)
External Battery:
Location: Sliding latched module on bottom of unit