WARN I NG: SHUT POWER OFF AT FUSE OR CI RCUI T BREAKER 5-LIGHT CHANDELIER
WARN ING: SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER PACKAGE CONTENTS E PART DESCRIPTION A B C D E F Canopy Mounting Bracket Threaded Nipple Hex Nut Socket Coupling G rings QTY.
WARNI NG : SHUT POWER OFF AT FUSE OR CI RCUI T BREAKER HARDW ARE CONTE NTS AA BB Wire Connector Short Qty: 3 Machine Screw Qty: 2 I SAFETY IN FORMATION Please read and understand this entire manual before attempting to assemble, operate or install the product. ! WARN ING IMPORTANT: NEVER attempt any work without shutting off the electricity.
WARN I NG : SHUT POWER OFF AT FUSE OR C I RCU I T BREAKER ASSEMBLY INSTRUCTIONS 1. rings (G). Lamp body (N). 1 Note: The lifting ring is tightened on the lamp body. 2. Chain (M) Latch ( L) rings ( G) 2 Note:Hang the lock catch in the ring 1n turn. 3. Screw fixture lo op (J) onto coupling (F). Note: The electrical cable will need to get pulled through the individual parts as they are installed on this and later steps.
WARNI NG : SHUT POWER OFF AT FUSE OR CI RCUI T BREAKER ASSEMBLY INSTRUCTIONS 4. Position threaded nipple (C) in mounting bracket (8) so when mounted: 4 The threaded nipple (C) will protrude a minimum of 1 /4 inch beyond the raised center portion of the mounting bracket (B). The threaded nipple (C) height is positioned so 1/2 the exterior threads of the screw collar loop (I) will extend past the canopy (A) when it is mounted. I 8 \ q 1 ?'� a) 1/4 I nch Id c���n C A Note: Canopy is only needed to
WARNI NG : SHUT POWER OFF AT FUSE OR CI RCUI T BREAKER ASSEMBLY INSTR UC TIONS 7. Thread chain (K) though screw collar ring (H) and canopy (A). Using the open chain links on chain (K), attach one end to screw collar loop (I) and the other end to upper fixture loop (J). Weave the fixture electrical and ground wires through every other chain link and pass through threaded nipple (C) into outlet box. Lower the screw collar ring (H) and canopy (A) over the chain (K).
WARNI NG : SHUT POWER OFF AT FUSE OR CI RCUI T BREAKER ASSEMBLY INSTR UC TIONS 9. Pass canopy (A) over the screw collar loop (I). Attach screw collar ring (H) to screw collar loop (I) to secure canopy (A) . 9 A 10. Insert 40-watt ma x. candelabra-base incandescent bulb or CFL/LED equivalent (none included) into socket (E). CARE AND M AINTEN ANCE . Always be certain that electric current is turned off before cleaning this item. . Use a soft, moist cloth with mild non-abrasive soap to clean fixture.
WARNI NG : SHUT POWER OFF AT FUSE OR CI RCUI T BREAKER WARRANTY We warrants that its products will be free from defects in material and workmanship for one (1) year from the date of purchase by the Original Purchaser.