Instruction Manual

- No 3 (red) 2nd ON and No 4
(blue) 2nd OFF
The four setting tappets, coloured
red and blue, are moved around
the circumference of the dial to set
your required ON and OFF times.
- No 1 (red) 1st ON and No 2 (blue)
1st OFF
These tappets work in pairs to
switch the system ON and OFF.
Setting The On/Off Times
3
Tappets cannot be moved across the Time line. The position of
the dial may have to be altered to set the initial ON/OFF time.
Please ensure the clock is set to the correct current time after
altering the ON/OFF settings.
Please ensure that you press and hold down any tappet that is to
be moved, release tappet only once correct time position has
been reached.
The tappets may be moved in either direction. (See diagram)
Lightly Press
Down On
No 1 Tappet.
Move Tappet
Until Reaching
The Desired
On Time
Lightly Press
Down On
No 2 Tappet.
Move Tappet
Until Reaching
The Desired
Off Time
Repeat
Previous
Instructions
For 2nd On/Off
Settings.
Using Tappets
3 And 4
Move The
Programme
Selection
Switch To
The
Required
Position